50T-36-LRL-V1-11-02 TAIWAN KCL Vane pump 50T Series	Bearing Inner Dia. Shape:Cylindrical Bore Set; Machining:No; Grease Type:Standard Grease; Accessory:With steel plate cov; Surface Treatment:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Round flange shape; Fit:J7;
50T-21-FRL-V1-6-01 TAIWAN KCL Vane pump 50T Series	Number of Bearings:Double; Bearing Part Number:6203; Flange Shape:Compact Type; Holder Surface Treatment:Not Provided; Bearing Retained:Yes (with retaining; Shape:Flange Type; Type:Bearings with Housin; Bearing Used:Deep Groove Ball Bea; Days to Ship:8 Days;
50T-21-LRL-V1-23-01 TAIWAN KCL Vane pump 50T Series	C0:7.88 kN; T max.:100 °C; S:7.5 mm; J:99 mm; Recommended tightening torque for set screw:3.7 Nm; H:130 mm; N:16mm; Z:24.2 mm; d:22.22 mm; Weight:0.58 kg;
50T-12-L-RL-01 TAIWAN KCL Vane pump 50T Series	Bearing number:693ZZ; Size (mm):3x8x4; Bore Diameter (mm):3; Outer Diameter (mm):8; Width (mm):4; d:3 mm; D:8 mm; B:4 mm; C:4 mm; r min.:0,15 mm; Basic dynamic load rating (C):0,43 kN;
50T-40-LLR-V1-6-02 TAIWAN KCL Vane pump 50T Series	Pre Install Clearance Min:0.0030 in; e - Geometry Factor:0.24; Dimension SVV:4.02 in; Oil Lubrication - M/N Seal:2000 rpm; Housing Style:Two-Bolt Pillow Bloc; Shaft Size  :2-3/16 in; Dimension D Min:6.50 in; Dimension B:5.25 in; Dimension G:2.630 in; Y1 - Geometry Factor:2.84;
50T-36-FRR-V1-6-01 TAIWAN KCL Vane pump 50T Series	e:16 mm; d:25.4 mm; T max.:100 °C; N:19mm; Designation of bearing:EX305-16G2L3; d1:42.8 mm; Recommended tightening torque for set screw:8 Nm; C:22.36 kN; B:34.9 mm; s1:33.35 mm;
50T-30-LLR-V1-6-02 TAIWAN KCL Vane pump 50T Series	Bearing Inner Dia. Shape:Cylindrical Bore Set; Machining:No; Grease Type:Standard Grease; Accessory:With steel plate cov; Surface Treatment:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Round flange shape; Fit:J7;
50T-40-LLR-V1-17-01 TAIWAN KCL Vane pump 50T Series	Designation of housing:FS312-; S:26 mm; e:19 mm; A1:22 mm; L:195 mm; J:150 mm; N:23mm; B:71 mm; A2:64 mm; C:81.6 kN;