50T-19-F-RL-02 TAIWAN KCL Vane pump 50T Series	e:16 mm; d:25.4 mm; T max.:100 °C; N:19mm; Designation of bearing:EX305-16G2L3; d1:42.8 mm; Recommended tightening torque for set screw:8 Nm; C:22.36 kN; B:34.9 mm; s1:33.35 mm;
50T-17-FLR-V1-26-01 TAIWAN KCL Vane pump 50T Series	Bearing Inner Dia. Shape:Cylindrical Bore Set; Machining:No; Grease Type:Standard Grease; Accessory:With steel plate cov; Surface Treatment:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Round flange shape; Fit:J7;
50T-26-F-RL-02 TAIWAN KCL Vane pump 50T Series	Locking Style:Single V-Lock; Grease Lubrication - T Seal:1600 rpm; Grease Lubrication - B/C/O Seal:900 rpm; Dimension H:1.53 in; Dimension G:3.420 in; Eng Internal Radial Clearance - Min:0.0043; Float:0.083 in; Bearing Number:22220; Pre Install Clearance Max:0.0055 in; Y2 - Geometry Factor:4.24;
50T-19-LLR-V1-8-02 TAIWAN KCL Vane pump 50T Series	G:M6x1; C:19.5 kN; N:12mm; A:31 mm; Designation of housing:F206N-; Weight:1.19 kg; J:83 mm; T min.:-20 °C; Dz:70 mm; Recommended tightening torque for set screw:11.5 Nm;
50T-12-LLL-V1-31-01 TAIWAN KCL Vane pump 50T Series	Category:Flange Block; Inventory:0.0; Minimum Buy Quantity:N/A; Weight:6.81; Product Group:M06288; Number of Mounting Holes:4; Mounting Method:Eccentric Collar; Housing Style:4 Bolt Round Flange Cartridge; Rolling Element:Spherical Roller Bearing; Housing Material:Cast Iron; Expansion / Non-expansion:Non-expansion; Mounting Bolts:1/2 Inch; Relubricatable:Yes; Insert Part Number:3207U; Seals:Clearance Seal;
50T-40-FRL-V1-26-01 TAIWAN KCL Vane pump 50T Series	e:16 mm; d:25.4 mm; T max.:100 °C; N:19mm; Designation of bearing:EX305-16G2L3; d1:42.8 mm; Recommended tightening torque for set screw:8 Nm; C:22.36 kN; B:34.9 mm; s1:33.35 mm;
50T-40-LLL-V1-19-02 TAIWAN KCL Vane pump 50T Series	C0:7.88 kN; T max.:100 °C; S:7.5 mm; J:99 mm; Recommended tightening torque for set screw:3.7 Nm; H:130 mm; N:16mm; Z:24.2 mm; d:22.22 mm; Weight:0.58 kg;
50T-26-FLR-V1-31-01 TAIWAN KCL Vane pump 50T Series	G:M6x1; C:19.5 kN; N:12mm; A:31 mm; Designation of housing:F206N-; Weight:1.19 kg; J:83 mm; T min.:-20 °C; Dz:70 mm; Recommended tightening torque for set screw:11.5 Nm;