DVQ425-189-52-L-RAA TAIWAN KCL Vane pump DVQ Series	Max operating temperature, Tmax:120 °C; Category:Bearings; Fatigue limit load, Cu:8.1 kN; Radial clearance class:C3; ra max:1 mm; B:19 mm; r1a max:1 mm; Product Group:B04144; Static load, C0:66.5 kN; Dynamic load, C:63 kN;
DVQ435-237-125-L-LAA TAIWAN KCL Vane pump DVQ Series	Bearing Weight:0.70 Kg; d:50.000 mm; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:21400 N; Series:M205100; da - Cone Frontface Backing Diameter:56.90 mm; C1 - Dynamic Radial Rating (1 million revolutions)5:147000 N; Cone Part Number:JM205149A; a - Effective Center Location3:-7.6 mm; C - Cup Width:23.000 mm; B - Cone Width:28.000 mm;
DVQ425-156-47-L-LAA TAIWAN KCL Vane pump DVQ Series	Category:Bearings; F:54.5 mm; Weight / Kilogram:0.431; da min:51.5 mm; ra max:1 mm; Max operating temperature, Tmax:120 °C; Radial clearance class:C3; Static load, C0:66.5 kN; Nlim (grease):7,600 rpm; r1s min:1.1 mm;
DVQ425-136-18-F-RAA TAIWAN KCL Vane pump DVQ Series	J:184 mm; s1:26.85 mm; A1:44 mm; d:61.91 mm; Recommended tightening torque for set screw:16.8 Nm; Weight:4.72 kg; H:69.8 mm; S:14.9 mm; B:53.7 mm; L1:70 mm;
DVQ425-200-26-L-LAA TAIWAN KCL Vane pump DVQ Series	Basic Load Rating, Dynamic Rating(N):239000; Inner/Outer Ring Material:Steel; RoHS:6; Shaft Bore Config.:Cylindrical Bore; B:37; Bearing Ring:With Oil Hole, Oil G; Raceway Ring Shape:Self-aligning roller; Load Direction:Radial; Size Standards:Metric System;
DVQ425-136-47-F-RAA TAIWAN KCL Vane pump DVQ Series	J:184 mm; s1:26.85 mm; A1:44 mm; d:61.91 mm; Recommended tightening torque for set screw:16.8 Nm; Weight:4.72 kg; H:69.8 mm; S:14.9 mm; B:53.7 mm; L1:70 mm;
DVQ425-156-18-L-LAA TAIWAN KCL Vane pump DVQ Series	L:97 mm; H1:76 mm; N1:16 mm; SW:3.18 mm; Designation of closed end cover:SCC205; H2:51 mm; Designation of housing:T205N-; A:32 mm; Recommended tightening torque for set screw:3.7 Nm; L2:10 mm;
DVQ435-200-60-L-LAA TAIWAN KCL Vane pump DVQ Series	L:97 mm; H1:76 mm; N1:16 mm; SW:3.18 mm; Designation of closed end cover:SCC205; H2:51 mm; Designation of housing:T205N-; A:32 mm; Recommended tightening torque for set screw:3.7 Nm; L2:10 mm;