DVQ425-189-52-L-LAA TAIWAN KCL Vane pump DVQ Series	Unit, Type:Insert Bearing Unit; Accessory:With cast iron cover; Seal:Silicone; Stroke:No; Bearing Unit, Type:Round flange shape; Diameter series symbol:Used for Light load; Bearing Inner Dia. Shape:Cylindrical Bore Set; Unit Body Material:Cast Iron;
DVQ435-156-66-L-LAA TAIWAN KCL Vane pump DVQ Series	Series:43000; e - ISO Factor8:0.67; C1 - Dynamic Radial Rating (1 million revolutions)5:20700 lbf; C0 - Static Radial Rating:17100 lbf; R - Cone Backface To Clear Radius1:0.760 mm; da - Cone Frontface Backing Diameter:39.62 mm; a - Effective Center Location3:-2 mm; Cg - Geometry Factor:0.0774; K - Factor7:0.87; C - Cup Width:17.463 mm;
DVQ435-156-60-F-LAA TAIWAN KCL Vane pump DVQ Series	d:47.62 mm; T min.:-20 °C; L1:65 mm; B:43.5 mm; Weight:2.8 kg; N1:25 mm; S:10.9 mm; A:60 mm; Recommended tightening torque for set screw:8 Nm; T max.:200 °C;
DVQ435-216-108-L-LAA TAIWAN KCL Vane pump DVQ Series	J:184 mm; s1:26.85 mm; A1:44 mm; d:61.91 mm; Recommended tightening torque for set screw:16.8 Nm; Weight:4.72 kg; H:69.8 mm; S:14.9 mm; B:53.7 mm; L1:70 mm;
DVQ435-237-60-F-LAA TAIWAN KCL Vane pump DVQ Series	d:47.62 mm; T min.:-20 °C; L1:65 mm; B:43.5 mm; Weight:2.8 kg; N1:25 mm; S:10.9 mm; A:60 mm; Recommended tightening torque for set screw:8 Nm; T max.:200 °C;
DVQ425-216-43-L-RAA TAIWAN KCL Vane pump DVQ Series	C - Dynamic Load (Basic):49900 lb; Float:0.083 in; Shaft Tolerance:0.0035 in; Oil Lubrication - M/N Seal:1600 rpm; Eng Internal Radial Clearance - Max:0.0047; Dimension J (Bolt Size):0.875 in; Dimension H:1.38 in; Int Radial Clearance Reduction Min:0.0015 in; Grease Lubrication - B/C/O Seal:1300 rpm; Dimension M:1.73 in;
DVQ425-200-22-L-LAA TAIWAN KCL Vane pump DVQ Series	Category:Bearings; F:54.5 mm; Weight / Kilogram:0.431; da min:51.5 mm; ra max:1 mm; Max operating temperature, Tmax:120 °C; Radial clearance class:C3; Static load, C0:66.5 kN; Nlim (grease):7,600 rpm; r1s min:1.1 mm;
DVQ425-156-75-L-LAA TAIWAN KCL Vane pump DVQ Series	d:47.62 mm; T min.:-20 °C; L1:65 mm; B:43.5 mm; Weight:2.8 kg; N1:25 mm; S:10.9 mm; A:60 mm; Recommended tightening torque for set screw:8 Nm; T max.:200 °C;