DVQ425-189-75-L-LAA TAIWAN KCL Vane pump DVQ Series | d:36.51 mm; T min.:-40 °C; S:8.5 mm; e:21 mm; A2:44.5 mm; Designation of bearing:US207-23G2T04; G:R1/8"; C0:15.2 kN; B:32 mm; Weight:1.47 kg; |
DVQ425-200-75-F-RAA TAIWAN KCL Vane pump DVQ Series | C - Dynamic Load (Basic):49900 lb; Float:0.083 in; Shaft Tolerance:0.0035 in; Oil Lubrication - M/N Seal:1600 rpm; Eng Internal Radial Clearance - Max:0.0047; Dimension J (Bolt Size):0.875 in; Dimension H:1.38 in; Int Radial Clearance Reduction Min:0.0015 in; Grease Lubrication - B/C/O Seal:1300 rpm; Dimension M:1.73 in; |
DVQ425-156-43-L-RAA TAIWAN KCL Vane pump DVQ Series | J:184 mm; s1:26.85 mm; A1:44 mm; d:61.91 mm; Recommended tightening torque for set screw:16.8 Nm; Weight:4.72 kg; H:69.8 mm; S:14.9 mm; B:53.7 mm; L1:70 mm; |
DVQ425-189-52-F-RAA TAIWAN KCL Vane pump DVQ Series | Basic Load Rating, Dynamic Rating(N):239000; Inner/Outer Ring Material:Steel; RoHS:6; Shaft Bore Config.:Cylindrical Bore; B:37; Bearing Ring:With Oil Hole, Oil G; Raceway Ring Shape:Self-aligning roller; Load Direction:Radial; Size Standards:Metric System; |
DVQ425-216-38-F-RAA TAIWAN KCL Vane pump DVQ Series | Max operating temperature, Tmax:120 °C; Category:Bearings; Fatigue limit load, Cu:8.1 kN; Radial clearance class:C3; ra max:1 mm; B:19 mm; r1a max:1 mm; Product Group:B04144; Static load, C0:66.5 kN; Dynamic load, C:63 kN; |
DVQ425-136-52-L-LAA TAIWAN KCL Vane pump DVQ Series | d:36.51 mm; T min.:-40 °C; S:8.5 mm; e:21 mm; A2:44.5 mm; Designation of bearing:US207-23G2T04; G:R1/8"; C0:15.2 kN; B:32 mm; Weight:1.47 kg; |
DVQ425-200-22-L-LAA TAIWAN KCL Vane pump DVQ Series | Category:Bearings; F:54.5 mm; Weight / Kilogram:0.431; da min:51.5 mm; ra max:1 mm; Max operating temperature, Tmax:120 °C; Radial clearance class:C3; Static load, C0:66.5 kN; Nlim (grease):7,600 rpm; r1s min:1.1 mm; |
DVQ435-200-60-L-LAA TAIWAN KCL Vane pump DVQ Series | L:97 mm; H1:76 mm; N1:16 mm; SW:3.18 mm; Designation of closed end cover:SCC205; H2:51 mm; Designation of housing:T205N-; A:32 mm; Recommended tightening torque for set screw:3.7 Nm; L2:10 mm; |