TAIWAN VPKCC-F4030A1A1-01-B KCL Vane pump VPKCC Series | d:22.22 mm; Weight:1.65 kg; Designation of housing:SP203-205/52-; SW:3.18 mm; A:21 mm; C:14 kN; Designation of bearing:EX205-14G2L3; Recommended tightening torque for set screw:3.7 Nm; H2:41 mm; A5:17.4 mm; |
TAIWAN VPKCC-F2340A2A4-01-C KCL Vane pump VPKCC Series | Characteristic inner ring frequency, BPFI:14.32 Hz; Max operating temperature, Tmax:200 °C; Number of lubrication holes:3; Y2:3.13; e:0.32; Radial clearance class:C3; D:400 mm; da min:274.6 mm; k:6 mm; Da max:385.4 mm; |
TAIWAN VPKCC-F2640A4A2-01-B KCL Vane pump VPKCC Series | Accessory:With steel plate cov; Basic Load Rating, Dynamic Rating(N):205000; Bearing Unit, Type:Take-Up Type; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; d:100; Stroke:No; Fit:J7; Unit Body Material:Cast Iron; |
TAIWAN VPKCC-F2340A4A3-01-A KCL Vane pump VPKCC Series | Max Grease Speed:2900; Housing:SNT 522-619; G:M24; Max Oil Speed:3500; Material :Cast Iron; Jmax:356 mm; L:410.00 mm; Jmin:344 mm; End Cover2:EC522-619; Locknut:KM22; |
TAIWAN VPKCC-F2630A1A3-01-A KCL Vane pump VPKCC Series | Ca90 - Dynamic Thrust Rating (90 million revolutions)6:62200 lbf; R - Cone Backface To Clear Radius1:6.35 mm; a - Effective Center Location3:9.1 mm; Cg - Geometry Factor:0.166; Series:940000; Bearing Weight:51.60 Kg; G1 - Heat Generation Factor (Roller-Raceway):1770; K - Factor7:1.45; C0 - Static Radial Rating:471000 lbf; Cone Part Number:EE941205; |
TAIWAN VPKCC-F2623A1A2-01-B KCL Vane pump VPKCC Series | Max Grease Speed:2900; Housing:SNT 522-619; G:M24; Max Oil Speed:3500; Material :Cast Iron; Jmax:356 mm; L:410.00 mm; Jmin:344 mm; End Cover2:EC522-619; Locknut:KM22; |
TAIWAN VPKCC-F3030A2A3-01-D KCL Vane pump VPKCC Series | Dynamic load, C:120 kN; Relubricatable:Yes; Fatigue limit load, Cu:16.3 kN; Weight / LBS:4.135; Da max:141 mm; Snap Ring:No; db min:104 mm; Static load, C0:140 kN; Product Group:B04144; rs min:2 mm; |
TAIWAN VPKCC-F2630A3A2-01-C KCL Vane pump VPKCC Series | Volume Discount:Available; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12; Shape:Flanged Pilot Type; Type:Bearings with Housin; Flange Shape:Square Type; Flange O.D. H(φ):58; |