TAIWAN VPKCC-F2330A4A1-01-D KCL Vane pump VPKCC Series	Dynamic load, C:120 kN; Relubricatable:Yes; Fatigue limit load, Cu:16.3 kN; Weight / LBS:4.135; Da max:141 mm; Snap Ring:No; db min:104 mm; Static load, C0:140 kN; Product Group:B04144; rs min:2 mm;
TAIWAN VPKCC-F3023A2A3-01-D KCL Vane pump VPKCC Series	d:22.22 mm; Weight:1.65 kg; Designation of housing:SP203-205/52-; SW:3.18 mm; A:21 mm; C:14 kN; Designation of bearing:EX205-14G2L3; Recommended tightening torque for set screw:3.7 Nm; H2:41 mm; A5:17.4 mm;
TAIWAN VPKCC-F2020A1A3-01-B KCL Vane pump VPKCC Series	Bore Type:Cylindrical Bore; Enclosure:Open; Configuration:Single Row; d:70 mm; D:150 mm; B:35 mm; Fillet Radius/Chamfer:2.1 mm; Outside Ring Inside Diameter:130 mm; r1:2.1 mm; Dynamic Load Rating:158,000 N; Static Load Rating:220,000 N; Limiting Speed - Grease:4,000 rpm; Limiting Speed - Oil:5,000 rpm; Radial Clearance:0.040 to 0.075 mm; da (min):82 mm; db (min):82 mm; db (max):87 mm; dc (min):92 mm;
TAIWAN VPKCC-F2623A1A4-01-B KCL Vane pump VPKCC Series	Volume Discount:Available; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12; Shape:Flanged Pilot Type; Type:Bearings with Housin; Flange Shape:Square Type; Flange O.D. H(φ):58;
TAIWAN VPKCC-F4040A3A4-01-A KCL Vane pump VPKCC Series	Characteristic inner ring frequency, BPFI:14.32 Hz; Max operating temperature, Tmax:200 °C; Number of lubrication holes:3; Y2:3.13; e:0.32; Radial clearance class:C3; D:400 mm; da min:274.6 mm; k:6 mm; Da max:385.4 mm;
TAIWAN VPKCC-F4023A2A2-01-B KCL Vane pump VPKCC Series	Seal Type:High Temperature Pac; Housing Width:5.3 in; Bearing UPC:013992026385; Cr - Dynamic Load Rating:42039 lbf; Bearing Type:Split Cylindrical Re; Support Type:Two-Bolt Plummer Blo; Dimension M:110 mm; Cor - Static Load Rating:51931 lbf; Note:This product line wa; Series Type:Light Series;
TAIWAN VPKCC-F4026A3A2-01-A KCL Vane pump VPKCC Series	Max Grease Speed:2900; Housing:SNT 522-619; G:M24; Max Oil Speed:3500; Material :Cast Iron; Jmax:356 mm; L:410.00 mm; Jmin:344 mm; End Cover2:EC522-619; Locknut:KM22;
TAIWAN VPKCC-F2630A1A4-01-C KCL Vane pump VPKCC Series	Ca90 - Dynamic Thrust Rating (90 million revolutions)6:62200 lbf; R - Cone Backface To Clear Radius1:6.35 mm; a - Effective Center Location3:9.1 mm; Cg - Geometry Factor:0.166; Series:940000; Bearing Weight:51.60 Kg; G1 - Heat Generation Factor (Roller-Raceway):1770; K - Factor7:1.45; C0 - Static Radial Rating:471000 lbf; Cone Part Number:EE941205;