TAIWAN VPKCC-F2623A3A4-01-C KCL Vane pump VPKCC Series	Accessory:With steel plate cov; Basic Load Rating, Dynamic Rating(N):205000; Bearing Unit, Type:Take-Up Type; Rolling Element Material:Bearing Steel; Unit, Type:Insert Bearing Unit; d:100; Stroke:No; Fit:J7; Unit Body Material:Cast Iron;
TAIWAN VPKCC-F2623A2A2-01-D KCL Vane pump VPKCC Series	Housing Material:1045 Carbon Steel; Bearing Used:Deep Groove Ball Bea; RoHS:6; Bearing Retained:No; Bearing Material:Steel; Shape:Bottom Mount; Volume Discount:Available;
TAIWAN VPKCC-F4040A2A4-01-B KCL Vane pump VPKCC Series	Dynamic load, C:120 kN; Relubricatable:Yes; Fatigue limit load, Cu:16.3 kN; Weight / LBS:4.135; Da max:141 mm; Snap Ring:No; db min:104 mm; Static load, C0:140 kN; Product Group:B04144; rs min:2 mm;
TAIWAN VPKCC-F2626A1A2-01-C KCL Vane pump VPKCC Series	Characteristic inner ring frequency, BPFI:14.32 Hz; Max operating temperature, Tmax:200 °C; Number of lubrication holes:3; Y2:3.13; e:0.32; Radial clearance class:C3; D:400 mm; da min:274.6 mm; k:6 mm; Da max:385.4 mm;
TAIWAN VPKCC-F2626A3A3-01-D KCL Vane pump VPKCC Series	d:22.22 mm; Weight:1.65 kg; Designation of housing:SP203-205/52-; SW:3.18 mm; A:21 mm; C:14 kN; Designation of bearing:EX205-14G2L3; Recommended tightening torque for set screw:3.7 Nm; H2:41 mm; A5:17.4 mm;
TAIWAN VPKCC-F4030A1A4-01-B KCL Vane pump VPKCC Series	Diameter series symbol:Used for Light load; Stroke:No; Unit Body Material:Cast Iron; Rolling Element Material:Bearing Steel; Surface Treatment:No; Unit, Type:Insert Bearing Unit; Basic Load Rating, Static Rating(N):29400; Bearing Inner Dia. Shape:Cylindrical Bore Set; Fit:J7;
TAIWAN VPKCC-F4040A3A1-01-B KCL Vane pump VPKCC Series	RoHS:6; Basic Dynamic Load Rating(N):5100; Seal, Shield Symbols:LLB; D:28; Retainer Type:Punching; Outer Ring Shape:Flat; Max. Allowed rpm(rpm):26000; Number of Raceway Ring Rows:Single Row; Specifications/Environment:Standard; Holder Symbol:JRX;
TAIWAN VPKCC-F3023A3A4-01-D KCL Vane pump VPKCC Series	Volume Discount:Available; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):12; Shape:Flanged Pilot Type; Type:Bearings with Housin; Flange Shape:Square Type; Flange O.D. H(φ):58;