VQ225-18-65-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-18-65-L-RAA	C0:7.88 kN; A:21 mm; d:25 mm; H2:41 mm; L1:225 mm; B:34.8 mm; SW:3 mm; Designation of open end cover:SCOE205-25; Designation of housing:SP203-205/52N-; L:264 mm;
VQ225-60-47-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-60-47-F-RAA	A1:30 mm; N1:21 mm; H:42.9 mm; L:165 mm; T min.:-20 °C; d1:44.1 mm; Recommended tightening torque for set screw:11.5 Nm; S:9 mm; C0:11.2 kN; B1:35.7 mm;
VQ225-65-75-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-65-75-F-LAA	e - ISO Factor3:0.23; D:540.000 mm; C1(2) - Dynamic Radial Rating (Two-Rows):2840000 N; Cage Type:EMB; Reference Thermal Speed Rating (Oil)7:900; R - Inner Ring To Clear Radius1:4.000 mm; B - Inner Ring Width:134 mm; Cg - Geometry Factor8:0.1391; r - Outer Ring To Clear Radius2:4.000 mm; Cage Material:Brass;
VQ225-18-43-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-18-43-F-RAA	Weight:4.73 kg; Z:31.5 mm; T min.:-20 °C; S:25.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:PE212N-; L1:71 mm; N:18mm; s1:32.55 mm; G:R1/8";
VQ225-65-60-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-65-60-F-LAA	Mass (without HJ ring):0.34 kg; r1s min:1.1 mm; Fatigue limit load, Cu:6.8 kN; Max operating temperature, Tmax:120 °C; Minimum Buy Quantity:N/A; da max:33 mm; Characteristic cage frequency, FTF:0.39 Hz; da min:31.5 mm; B:24 mm; Category:Bearings;
VQ225-65-60-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-65-60-F-RAA	A1:30 mm; N1:21 mm; H:42.9 mm; L:165 mm; T min.:-20 °C; d1:44.1 mm; Recommended tightening torque for set screw:11.5 Nm; S:9 mm; C0:11.2 kN; B1:35.7 mm;
VQ225-47-75-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-47-75-F-LAA	Mass (without HJ ring):0.34 kg; r1s min:1.1 mm; Fatigue limit load, Cu:6.8 kN; Max operating temperature, Tmax:120 °C; Minimum Buy Quantity:N/A; da max:33 mm; Characteristic cage frequency, FTF:0.39 Hz; da min:31.5 mm; B:24 mm; Category:Bearings;
VQ225-60-52-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-60-52-F-RAA	Shape:Flange Type; Days to Ship:7 Days; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel;