VQ225-22-18-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-22-18-F-RAA	e - ISO Factor3:0.23; D:540.000 mm; C1(2) - Dynamic Radial Rating (Two-Rows):2840000 N; Cage Type:EMB; Reference Thermal Speed Rating (Oil)7:900; R - Inner Ring To Clear Radius1:4.000 mm; B - Inner Ring Width:134 mm; Cg - Geometry Factor8:0.1391; r - Outer Ring To Clear Radius2:4.000 mm; Cage Material:Brass;
VQ225-38-43-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-38-43-L-RAA	Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Bearing Retained:No; Volume Discount:Available; RoHS:6; Seals:ZZ (Double Shield); Width T(mm):11; Holder Surface Treatment:Electroless Nickel P; Flange O.D. H(φ):69;
VQ225-75-43-L-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-75-43-L-LAA	A1:30 mm; N1:21 mm; H:42.9 mm; L:165 mm; T min.:-20 °C; d1:44.1 mm; Recommended tightening torque for set screw:11.5 Nm; S:9 mm; C0:11.2 kN; B1:35.7 mm;
VQ225-43-52-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-43-52-L-RAA	da min:43 mm; d1:50.4 mm; Radial clearance class:CN; rs min:1.5 mm; Mass:0.46 kg; Nlim:14,000 rpm; B:21 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:33 kN; Nref:9,900 rpm;
VQ225-47-22-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-47-22-F-RAA	C0r - Static Load Rating:3.8 kN; Cr - Dynamic Load Rating:4.7 kN; Bore Size d:35 mm; Features:Open; Outside Ring Width B:7.000 mm; Radius Rs min:0.300 mm; Grease Limiting Speed:13000 rpm; Clearance:C3; Outside Diameter D:47.000 mm; Oil Limiting Speed:16000 rpm;
VQ225-43-22-L-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-43-22-L-LAA	C0:7.88 kN; A:21 mm; d:25 mm; H2:41 mm; L1:225 mm; B:34.8 mm; SW:3 mm; Designation of open end cover:SCOE205-25; Designation of housing:SP203-205/52N-; L:264 mm;
VQ225-47-26-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-47-26-F-RAA	C0:7.88 kN; A:21 mm; d:25 mm; H2:41 mm; L1:225 mm; B:34.8 mm; SW:3 mm; Designation of open end cover:SCOE205-25; Designation of housing:SP203-205/52N-; L:264 mm;
VQ225-18-26-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-18-26-F-RAA	Weight:4.73 kg; Z:31.5 mm; T min.:-20 °C; S:25.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:PE212N-; L1:71 mm; N:18mm; s1:32.55 mm; G:R1/8";