VQ225-60-47-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-60-47-F-RAA	A1:30 mm; N1:21 mm; H:42.9 mm; L:165 mm; T min.:-20 °C; d1:44.1 mm; Recommended tightening torque for set screw:11.5 Nm; S:9 mm; C0:11.2 kN; B1:35.7 mm;
VQ225-32-60-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-32-60-F-LAA	C0r - Static Load Rating:3.8 kN; Cr - Dynamic Load Rating:4.7 kN; Bore Size d:35 mm; Features:Open; Outside Ring Width B:7.000 mm; Radius Rs min:0.300 mm; Grease Limiting Speed:13000 rpm; Clearance:C3; Outside Diameter D:47.000 mm; Oil Limiting Speed:16000 rpm;
VQ225-26-52-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-26-52-F-RAA	da min:43 mm; d1:50.4 mm; Radial clearance class:CN; rs min:1.5 mm; Mass:0.46 kg; Nlim:14,000 rpm; B:21 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:33 kN; Nref:9,900 rpm;
VQ225-38-26-L-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-38-26-L-LAA	da min:43 mm; d1:50.4 mm; Radial clearance class:CN; rs min:1.5 mm; Mass:0.46 kg; Nlim:14,000 rpm; B:21 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:33 kN; Nref:9,900 rpm;
VQ225-43-47-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-43-47-F-LAA	Mass (without HJ ring):0.34 kg; r1s min:1.1 mm; Fatigue limit load, Cu:6.8 kN; Max operating temperature, Tmax:120 °C; Minimum Buy Quantity:N/A; da max:33 mm; Characteristic cage frequency, FTF:0.39 Hz; da min:31.5 mm; B:24 mm; Category:Bearings;
VQ225-47-60-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-47-60-F-RAA	Rolling Element Material:Bearing Steel; Machining:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Round flange shape; Fit:J7; Basic Load Rating, Dynamic Rating(N):43400; d:50; Stroke:No;
VQ225-65-47-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-65-47-F-LAA	Rolling Element Material:Bearing Steel; Machining:No; Unit Body Material:Cast Iron; Bearing Unit, Type:Round flange shape; Fit:J7; Basic Load Rating, Dynamic Rating(N):43400; d:50; Stroke:No;
VQ225-43-32-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-43-32-F-RAA	Weight:4.73 kg; Z:31.5 mm; T min.:-20 °C; S:25.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:PE212N-; L1:71 mm; N:18mm; s1:32.55 mm; G:R1/8";