VQ225-18-18-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-18-18-L-RAA	Mass (without HJ ring):0.34 kg; r1s min:1.1 mm; Fatigue limit load, Cu:6.8 kN; Max operating temperature, Tmax:120 °C; Minimum Buy Quantity:N/A; da max:33 mm; Characteristic cage frequency, FTF:0.39 Hz; da min:31.5 mm; B:24 mm; Category:Bearings;
VQ225-52-22-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-52-22-F-RAA	Shape:Flange Type; Days to Ship:7 Days; Holder Surface Treatment:Black Oxide Coating; Type:Bearings with Housin; Bearing Retained:No; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Housing Material:1045 Carbon Steel;
VQ225-38-43-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-38-43-L-RAA	Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Bearing Retained:No; Volume Discount:Available; RoHS:6; Seals:ZZ (Double Shield); Width T(mm):11; Holder Surface Treatment:Electroless Nickel P; Flange O.D. H(φ):69;
VQ225-47-26-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-47-26-L-RAA	da min:43 mm; d1:50.4 mm; Radial clearance class:CN; rs min:1.5 mm; Mass:0.46 kg; Nlim:14,000 rpm; B:21 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:33 kN; Nref:9,900 rpm;
VQ225-52-26-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-52-26-F-LAA	C0:7.88 kN; A:21 mm; d:25 mm; H2:41 mm; L1:225 mm; B:34.8 mm; SW:3 mm; Designation of open end cover:SCOE205-25; Designation of housing:SP203-205/52N-; L:264 mm;
VQ225-26-38-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-26-38-L-RAA	RoHS:6; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; Number of Bearings:Single; Flange Shape:Round Type; Type:Bearings with Housin; Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available;
VQ225-47-60-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-47-60-F-LAA	da min:43 mm; d1:50.4 mm; Radial clearance class:CN; rs min:1.5 mm; Mass:0.46 kg; Nlim:14,000 rpm; B:21 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:33 kN; Nref:9,900 rpm;
VQ225-60-38-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-60-38-F-RAA	Weight:4.73 kg; Z:31.5 mm; T min.:-20 °C; S:25.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:PE212N-; L1:71 mm; N:18mm; s1:32.55 mm; G:R1/8";