VQ225-52-47-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-52-47-F-LAA	C0r - Static Load Rating:3.8 kN; Cr - Dynamic Load Rating:4.7 kN; Bore Size d:35 mm; Features:Open; Outside Ring Width B:7.000 mm; Radius Rs min:0.300 mm; Grease Limiting Speed:13000 rpm; Clearance:C3; Outside Diameter D:47.000 mm; Oil Limiting Speed:16000 rpm;
VQ225-52-22-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-52-22-L-RAA	Bearing Used:Deep Groove Ball Bea; Flange Shape:Square Type; Bearing Retained:No; Volume Discount:Available; RoHS:6; Seals:ZZ (Double Shield); Width T(mm):11; Holder Surface Treatment:Electroless Nickel P; Flange O.D. H(φ):69;
VQ225-43-75-F-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-43-75-F-LAA	Weight:4.73 kg; Z:31.5 mm; T min.:-20 °C; S:25.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:PE212N-; L1:71 mm; N:18mm; s1:32.55 mm; G:R1/8";
VQ225-52-60-L-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-52-60-L-RAA	RoHS:6; Holder Surface Treatment:Clear Anodize; Shape:Flanged Pilot Type; Number of Bearings:Single; Flange Shape:Round Type; Type:Bearings with Housin; Bearing I.D. d(mm):6; Bearing Used:Deep Groove Ball Bea; Volume Discount:Available;
VQ225-38-26-L-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-38-26-L-LAA	da min:43 mm; d1:50.4 mm; Radial clearance class:CN; rs min:1.5 mm; Mass:0.46 kg; Nlim:14,000 rpm; B:21 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:33 kN; Nref:9,900 rpm;
VQ225-75-65-L-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-75-65-L-LAA	C0:7.88 kN; A:21 mm; d:25 mm; H2:41 mm; L1:225 mm; B:34.8 mm; SW:3 mm; Designation of open end cover:SCOE205-25; Designation of housing:SP203-205/52N-; L:264 mm;
VQ225-38-52-L-LAA TAIWAN KCL Vane pump VQ225 Series VQ225-38-52-L-LAA	da min:43 mm; d1:50.4 mm; Radial clearance class:CN; rs min:1.5 mm; Mass:0.46 kg; Nlim:14,000 rpm; B:21 mm; Characteristic inner ring frequency, BPFI:4.93 Hz; Dynamic load, C:33 kN; Nref:9,900 rpm;
VQ225-60-38-F-RAA TAIWAN KCL Vane pump VQ225 Series VQ225-60-38-F-RAA	Weight:4.73 kg; Z:31.5 mm; T min.:-20 °C; S:25.4 mm; Recommended tightening torque for set screw:22 Nm; Designation of housing:PE212N-; L1:71 mm; N:18mm; s1:32.55 mm; G:R1/8";