TAIWAN TCVP-F40-A3-TC YEESEN Oil Pump TCVP Series	R - Cone Backface To Clear Radius3:6.100 mm; Cg - Geometry Factor:0.13; Series:M716600; Ca90 - Dynamic Thrust Rating (90 million revolutions)7:31800 N; Design Units:METRIC; d:85 mm; a - Effective Center Location4:-0.3 mm; DD:111.1 mm; da - Cone Frontface Backing Diameter:92 mm; db - Cone Backface Backing Diameter:104 mm;
TAIWAN TCVP-F15-A2-02 YEESEN Oil Pump TCVP Series	N:M14; Weight:2.29 kg; C:31.85 kN; L:120 mm; Dz:95 mm; d:42.86 mm; Recommended tightening torque for set screw:8 Nm; s1:20.6 mm; Designation of open end cover:SCOU209-27; G:M6x1;
TAIWAN TCVP-F15-A2-02 YEESEN Oil Pump TCVP Series	Flange O.D. H(φ):40; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Retained:No; Seals:VV (Non-Contact Rubb; Flange Shape:Square Type; Type:Bearings with Housin; RoHS:6; Days to Ship:7 Days; Bearing Material:[Steel] Steel;
TAIWAN TCVP-F30-A2-TC YEESEN Oil Pump TCVP Series	Bearing UPC:013992035332; Support Type:Two-Bolt Plummer Blo; Dimension L:410 mm; Maximum Speed:2520 rpm; Cor - Static Load Rating:79358 lbf; Shaft Size:80 mm; Bearing Number:MSM80BR; Dimension H2:265 mm; Dimension J:350 mm; Dimension M:120 mm;
TAIWAN TCVP-F15-A3-TC YEESEN Oil Pump TCVP Series	Threads No. per Inch:6; Major Dia - B:11.004 in; d:9.449 in; Taper:1:12; L:7.874 in; F:0.178 in; A:10.262 in; Weight:40.75 lb; G:1.181 in;
TAIWAN TCVP-F40-A3-TC YEESEN Oil Pump TCVP Series	Dynamic load, C:12.3 kN; Characteristic inner ring frequency, BPFI:8.19 Hz; Characteristic outer ring frequency, BPF0:5.81 Hz; Static load, C0:8 kN; D2:42.9 mm; Preload level:GN; Axial rigidity:41.5 N/µm; ra max:0.6 mm; rs min:0.6 mm; r1a max:0.3 mm;
TAIWAN TCVP-F30-A3-02 YEESEN Oil Pump TCVP Series	Flange O.D. H(φ):40; Bearing Used:Deep Groove Ball Bea; Number of Bearings:Double; Bearing Retained:No; Seals:VV (Non-Contact Rubb; Flange Shape:Square Type; Type:Bearings with Housin; RoHS:6; Days to Ship:7 Days; Bearing Material:[Steel] Steel;
TAIWAN TCVP-F8-A2-TC YEESEN Oil Pump TCVP Series	Bearing I.D. d(mm):20; Width T(mm):50; Number of Bearings:Double; Bearing Part Number:6904; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] 201; Shape:Flange Type;