Komatsu PULLEY 6275-61-3380 PULLEY	Retainer Type:Punching; Revolution Frequency(rpm):4100; D:125; Inner/Outer Ring Material:Steel; Load Direction:Radial; Basic Load Rating, Dynamic Rating(N):235000; Shaft Bore Config.:Cylindrical Bore; Outer Ring Type:Flat; Specifications/Environment:Standard;
Komatsu PULLEY 6245-61-3351 PULLEY	C0:15.2 kN; B1:43 mm; Weight:1.65 kg; L:100 mm; H:47.6 mm; J:68 mm; Adapter sleeve reference:H2307-18; d1:52 mm; L1:35 mm; Designation of housing:PG207-;
Komatsu PULLEY 45B-2MG-2140KF PULLEY	C:33.5 kN; B:48 mm; C0:19.2 kN; A1:16 mm; A:36 mm; T max.:100 °C; J:100 mm; G:M6x1; H3:100; Recommended tightening torque for set screw:8 Nm;
Komatsu PULLEY 6136-31-1411 PULLEY	Size Standards:Metric System; O.D.(Ø):130; Bearing Style:Double Shielded; Seal, Shield Symbols:No; Bearing type symbol:No; Load Direction:Radial; Outer Ring:With Outer Ring; Material Symbol:No; Spacer, Sleeve symbol:No; Preload:No;
Komatsu PULLEY 6150-32-1510 PULLEY	Eng Internal Radial Clearance - Min:0.0063; Float:0.083 in; Dimension E:7.000 in; Grease Lubrication - T Seal:900 rpm; Eng Internal Radial Clearance - Max:0.0079; Dimension F:16.5 in; Grease Lubrication - M/N Seal:650 rpm; C0 - Static Load:237000 lb; Shaft Size Type:Imperial; Dimension L Exp:3.44 in;
Komatsu PULLEY 6210-21-3460 PULLEY	C:33.5 kN; B:48 mm; C0:19.2 kN; A1:16 mm; A:36 mm; T max.:100 °C; J:100 mm; G:M6x1; H3:100; Recommended tightening torque for set screw:8 Nm;
Komatsu PULLEY 6743-61-3350 PULLEY	g:67 mm; r max:1 mm; n:80 mm; v:45 mm; d:95 mm; m:400 mm; a:490 mm; Material of Housing:grey cast; oil quantity:1,600 Volume_cmc; c:50 mm;
Komatsu PULLEY KWKKS-75-55510 PULLEY	Flange Shape:Compact Type; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; RoHS:6;