Komatsu PULLEY 17A-862-1890 PULLEY	Days to Ship:8 Days; Basic Load Rating, Dynamic Rating(N):12800; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):6650; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Machining:No; Bearing Unit, Type:Round flange shape; d:20;
Komatsu PULLEY 23D-809-2130 PULLEY	Retainer Type:Punching; Revolution Frequency(rpm):4100; D:125; Inner/Outer Ring Material:Steel; Load Direction:Radial; Basic Load Rating, Dynamic Rating(N):235000; Shaft Bore Config.:Cylindrical Bore; Outer Ring Type:Flat; Specifications/Environment:Standard;
Komatsu PULLEY 6263-81-2110 PULLEY	RoHS:6; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Width T(mm):25; Seals:ZZ (Double Shield); Shape:Flange Type;
Komatsu PULLEY 8272-75-2180 PULLEY	C:33.5 kN; B:48 mm; C0:19.2 kN; A1:16 mm; A:36 mm; T max.:100 °C; J:100 mm; G:M6x1; H3:100; Recommended tightening torque for set screw:8 Nm;
Komatsu PULLEY SD2080-29010X0 PULLEY	Product Group:B00308; Fatigue limit load, Cu:0.52 kN; Minimum Buy Quantity:N/A; Internal Special Features:No; Bore:1.575 Inch | 40 Mill; Manufacturer Name:NTN; Snap Ring:No; Other Features:Deep Groove; Maximum Capacity / Filling Slot:No;
Komatsu PULLEY 23B-02-31740 PULLEY	Eng Internal Radial Clearance - Min:0.0063; Float:0.083 in; Dimension E:7.000 in; Grease Lubrication - T Seal:900 rpm; Eng Internal Radial Clearance - Max:0.0079; Dimension F:16.5 in; Grease Lubrication - M/N Seal:650 rpm; C0 - Static Load:237000 lb; Shaft Size Type:Imperial; Dimension L Exp:3.44 in;
Komatsu PULLEY 6275-61-3101 PULLEY ASS'Y	Eng Internal Radial Clearance - Min:0.0063; Float:0.083 in; Dimension E:7.000 in; Grease Lubrication - T Seal:900 rpm; Eng Internal Radial Clearance - Max:0.0079; Dimension F:16.5 in; Grease Lubrication - M/N Seal:650 rpm; C0 - Static Load:237000 lb; Shaft Size Type:Imperial; Dimension L Exp:3.44 in;
Komatsu PULLEY NJ12303-50K06KF PULLEY	RoHS:6; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Holder Surface Treatment:Black Oxide Coating; Bearing Material:[Steel] Steel; Width T(mm):25; Seals:ZZ (Double Shield); Shape:Flange Type;