Komatsu PULLEY 3EB-02-39910KF PULLEY	Product Group:B00308; Fatigue limit load, Cu:0.52 kN; Minimum Buy Quantity:N/A; Internal Special Features:No; Bore:1.575 Inch | 40 Mill; Manufacturer Name:NTN; Snap Ring:No; Other Features:Deep Groove; Maximum Capacity / Filling Slot:No;
Komatsu PULLEY KHP-8V03154 PULLEY	Retainer Type:Punching; Revolution Frequency(rpm):4100; D:125; Inner/Outer Ring Material:Steel; Load Direction:Radial; Basic Load Rating, Dynamic Rating(N):235000; Shaft Bore Config.:Cylindrical Bore; Outer Ring Type:Flat; Specifications/Environment:Standard;
Komatsu PULLEY NJ12303-L1600KF PULLEY	Eng Internal Radial Clearance - Min:0.0063; Float:0.083 in; Dimension E:7.000 in; Grease Lubrication - T Seal:900 rpm; Eng Internal Radial Clearance - Max:0.0079; Dimension F:16.5 in; Grease Lubrication - M/N Seal:650 rpm; C0 - Static Load:237000 lb; Shaft Size Type:Imperial; Dimension L Exp:3.44 in;
Komatsu PULLEY 8272-75-2180 PULLEY	Flange Shape:Compact Type; Seals:DD (Contact Rubber S; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Number of Bearings:Double; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; RoHS:6;
Komatsu PULLEY 6090-04-2450 PULLEY	N:M16; T min.:-20 °C; J:105 mm; d:60 mm; s1:26.85 mm; G:M6x1; A:70 mm; H2:138 mm; S:14.9 mm; Weight:4.4 kg;
Komatsu PULLEY 6155-31-1560 PULLEY	Retainer Type:Punching; Revolution Frequency(rpm):4100; D:125; Inner/Outer Ring Material:Steel; Load Direction:Radial; Basic Load Rating, Dynamic Rating(N):235000; Shaft Bore Config.:Cylindrical Bore; Outer Ring Type:Flat; Specifications/Environment:Standard;
Komatsu PULLEY 6261-61-3170 PULLEY	Days to Ship:8 Days; Basic Load Rating, Dynamic Rating(N):12800; Unit Body Material:Cast Iron; Basic Load Rating, Static Rating(N):6650; Unit, Type:Insert Bearing Unit; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Machining:No; Bearing Unit, Type:Round flange shape; d:20;
Komatsu PULLEY CU3081163 PULLEY	C:33.5 kN; B:48 mm; C0:19.2 kN; A1:16 mm; A:36 mm; T max.:100 °C; J:100 mm; G:M6x1; H3:100; Recommended tightening torque for set screw:8 Nm;