Komatsu CHARGER 6754-81-8280 TURBOCHARGER KI	N2:49 mm; s1:24.6 mm; A5:30.2 mm; H1:102 mm; C:31.85 kN; T max.:100 °C; H:117 mm; Z:70.2 mm; N:29mm; A1:16 mm;
Komatsu CHARGER 3LA-91-43210KF CHARGER ASS'Y	N2:49 mm; s1:24.6 mm; A5:30.2 mm; H1:102 mm; C:31.85 kN; T max.:100 °C; H:117 mm; Z:70.2 mm; N:29mm; A1:16 mm;
Komatsu CHARGER 3BA-91-72611KF CHARGER ASS'Y	Series:222K; S:0.782 in; Diameter d :3 1/4 in; SNW/SNP Assembly Weight:2.87 lb; Locknut:AN-18; Bearing Number:22218K; Lockwasher and Lockplates:W-18; Sleeve:S-18 x 3 1/4; Tolerance1:-0.004 in; D1:4.661 in;
Komatsu CHARGER 6754-81-8160 TURBOCHARGER KI	E:15 mm; Designation of housing:PAE209N-; A:48 mm; B:49.2 mm; Designation of closed end cover:SCC209; Recommended tightening torque for set screw:11.5 Nm; G:R1/8"; Dz:95 mm; C0:20.8 kN; d:45 mm;
Komatsu CHARGER 6138-82-8201 TURBOCHARGER	Basic Load Rating, Static Rating(N):21300; d:45; Bearing Inner Dia. Shape:Cylindrical Bore Set; Type of Insert Bearing:Cylindrical Bore Sha; Stroke:No; Unit Body Material:Cast iron made; Days to Ship:6 Days or more; Basic Load Rating Cr(KN):33; Shaft Dia. (mm)(φ):45; Diameter series symbol:Used for Light load;
Komatsu CHARGER 6156-81-8150 TUBOCHARGER	Type:Angular Contact Ball; Holder Symbol:TYN; Precision:Grade 4; Bearing Style:Double Shielded; Outer Ring Shape:Flat; Inner/Outer Ring Material:[Steel] Steel; Symbol of contact angle:A; Symbol of Bearing Ring Shape:No; Spacer, Sleeve symbol:No; O.D.(Ø):110;
Komatsu CHARGER 6156-81-8150 TUBOCHARGER	Characteristic rolling element frequency, BSF:4.64 Hz; Radial rigidity:297 N/µm; Nlim (grease):18,000 rpm; rs min:1.1 mm; Min operating temperature, Tmin:-30 °C; a:21 mm; Preload value:0.28 kN; Brand:SNR; D2:65.57 mm; Contact angle α:25 °;
Komatsu CHARGER 6745-81-8050 TURBOCHARGER KI	K - Factor3:1.49; Series:L521900; G1 - Heat Generation Factor (Roller-Raceway)7:152; Design Units:Imperial; Y2 - ISO Factor6:2.56; Y1 - ISO Factor5:1.72; Y - ISO Factor1:1.53; C - Double Cup Width:2.125 in; G2 - Heat Generation Factor (Rib-Roller End):108; D:5.7500 in;