Komatsu CHARGER 3BB-91-61523KF CHARGER	A1:13 mm; J:70 mm; L:95 mm; e:16 mm; d:25 mm; A:27 mm; Designation of housing:F205N-; N:12mm; Z:23.8 mm; s1:30.9 mm;
Komatsu CHARGER 6754-81-8040KF TURBOCHARGER	Bearing Retained:No; RoHS:6; Number of Bearings:Single; Type:Bearings with Housin; Shape:Flange Type; Volume Discount:Available; Bearing I.D. d(mm):40; Flange Shape:Square Type;
Komatsu CHARGER 3RB-91-51111KF CHARGER	Characteristic rolling element frequency, BSF:4.64 Hz; Radial rigidity:297 N/µm; Nlim (grease):18,000 rpm; rs min:1.1 mm; Min operating temperature, Tmin:-30 °C; a:21 mm; Preload value:0.28 kN; Brand:SNR; D2:65.57 mm; Contact angle α:25 °;
Komatsu CHARGER 6735-01-8120 TURBOCHARGER KI	E:15 mm; Designation of housing:PAE209N-; A:48 mm; B:49.2 mm; Designation of closed end cover:SCC209; Recommended tightening torque for set screw:11.5 Nm; G:R1/8"; Dz:95 mm; C0:20.8 kN; d:45 mm;
Komatsu CHARGER 6222-83-8120 TURBOCHARGER	Dimension B:11.0 in; Seal Type:High Temperature Pac; Dimension H:2.4 in; Bearing UPC:013992032799; Tensioning Unit Type:Push Type; Shaft Size:5-7/16 in; Maximum Speed:1450 rpm; Note:This product line wa; Dimension P:1.0 in; Cor - Static Load Rating:183669 lbf;
Komatsu CHARGER 6207-81-8331 TURBOCHARGER	K - Factor3:1.49; Series:L521900; G1 - Heat Generation Factor (Roller-Raceway)7:152; Design Units:Imperial; Y2 - ISO Factor6:2.56; Y1 - ISO Factor5:1.72; Y - ISO Factor1:1.53; C - Double Cup Width:2.125 in; G2 - Heat Generation Factor (Rib-Roller End):108; D:5.7500 in;
Komatsu CHARGER 6745-81-8070 TURBOCHARGER KI	Characteristic rolling element frequency, BSF:4.64 Hz; Radial rigidity:297 N/µm; Nlim (grease):18,000 rpm; rs min:1.1 mm; Min operating temperature, Tmin:-30 °C; a:21 mm; Preload value:0.28 kN; Brand:SNR; D2:65.57 mm; Contact angle α:25 °;
Komatsu CHARGER 3BA-91-75111KF CHARGER ASS'Y	K - Factor3:1.49; Series:L521900; G1 - Heat Generation Factor (Roller-Raceway)7:152; Design Units:Imperial; Y2 - ISO Factor6:2.56; Y1 - ISO Factor5:1.72; Y - ISO Factor1:1.53; C - Double Cup Width:2.125 in; G2 - Heat Generation Factor (Rib-Roller End):108; D:5.7500 in;