Komatsu CHARGER 3BA-91-73112KF CHARGER	A1:13 mm; J:70 mm; L:95 mm; e:16 mm; d:25 mm; A:27 mm; Designation of housing:F205N-; N:12mm; Z:23.8 mm; s1:30.9 mm;
Komatsu CHARGER 3BB-91-61222KF CHARGER	Dimension B:11.0 in; Seal Type:High Temperature Pac; Dimension H:2.4 in; Bearing UPC:013992032799; Tensioning Unit Type:Push Type; Shaft Size:5-7/16 in; Maximum Speed:1450 rpm; Note:This product line wa; Dimension P:1.0 in; Cor - Static Load Rating:183669 lbf;
Komatsu CHARGER 3RA-90-66111KF CHARGER	Dimension B:11.0 in; Seal Type:High Temperature Pac; Dimension H:2.4 in; Bearing UPC:013992032799; Tensioning Unit Type:Push Type; Shaft Size:5-7/16 in; Maximum Speed:1450 rpm; Note:This product line wa; Dimension P:1.0 in; Cor - Static Load Rating:183669 lbf;
Komatsu CHARGER 6754-81-8490 TURBOCHARGER KI	Characteristic rolling element frequency, BSF:4.64 Hz; Radial rigidity:297 N/µm; Nlim (grease):18,000 rpm; rs min:1.1 mm; Min operating temperature, Tmin:-30 °C; a:21 mm; Preload value:0.28 kN; Brand:SNR; D2:65.57 mm; Contact angle α:25 °;
Komatsu CHARGER 3BB-91-61512KF CHARGER	N2:49 mm; s1:24.6 mm; A5:30.2 mm; H1:102 mm; C:31.85 kN; T max.:100 °C; H:117 mm; Z:70.2 mm; N:29mm; A1:16 mm;
Komatsu CHARGER 6731-81-8170 TURBOCHARGER KI	E:15 mm; Designation of housing:PAE209N-; A:48 mm; B:49.2 mm; Designation of closed end cover:SCC209; Recommended tightening torque for set screw:11.5 Nm; G:R1/8"; Dz:95 mm; C0:20.8 kN; d:45 mm;
Komatsu CHARGER 6736-83-8081 TURBOCHARGER KI	r - Outer Ring To Clear Radius2:3.0 mm; Da - Outer Ring Backing Diameter:311.000 mm; C1(2) - Dynamic Radial Rating (Two-Rows):1940000 N; Bearing Weight:47.100 Kg; C0 - Static Radial Rating:2610000 N; R - Inner Ring To Clear Radius1:3.0 mm; Cage Type:EMB; da - Inner Ring Backing Diameter:225.000 mm; Cg - Geometry Factor8:0.0968; Cage Material:Brass;
Komatsu CHARGER 3BA-91-72711KF CHARGER	C0:15.2 kN; N1:21 mm; s1:30.2 mm; L1:54 mm; L:167 mm; Weight:1.7 kg; B1:38.9 mm; H1:19 mm; T max.:200 °C; N:17mm;