Komatsu CHARGER 6222-83-8220 TURBOCHARGER	Characteristic rolling element frequency, BSF:4.64 Hz; Radial rigidity:297 N/µm; Nlim (grease):18,000 rpm; rs min:1.1 mm; Min operating temperature, Tmin:-30 °C; a:21 mm; Preload value:0.28 kN; Brand:SNR; D2:65.57 mm; Contact angle α:25 °;
Komatsu CHARGER 6222-83-8180 TURBOCHARGER	C0:15.2 kN; N1:21 mm; s1:30.2 mm; L1:54 mm; L:167 mm; Weight:1.7 kg; B1:38.9 mm; H1:19 mm; T max.:200 °C; N:17mm;
Komatsu CHARGER 6735-83-8090 TURBOCHARGER KI	N2:49 mm; s1:24.6 mm; A5:30.2 mm; H1:102 mm; C:31.85 kN; T max.:100 °C; H:117 mm; Z:70.2 mm; N:29mm; A1:16 mm;
Komatsu CHARGER 6754-82-8010 TURBOCHARGER KI	Characteristic rolling element frequency, BSF:4.64 Hz; Radial rigidity:297 N/µm; Nlim (grease):18,000 rpm; rs min:1.1 mm; Min operating temperature, Tmin:-30 °C; a:21 mm; Preload value:0.28 kN; Brand:SNR; D2:65.57 mm; Contact angle α:25 °;
Komatsu CHARGER 6205-81-8291 TURBOCHARGER	r - Outer Ring To Clear Radius2:3.0 mm; Da - Outer Ring Backing Diameter:311.000 mm; C1(2) - Dynamic Radial Rating (Two-Rows):1940000 N; Bearing Weight:47.100 Kg; C0 - Static Radial Rating:2610000 N; R - Inner Ring To Clear Radius1:3.0 mm; Cage Type:EMB; da - Inner Ring Backing Diameter:225.000 mm; Cg - Geometry Factor8:0.0968; Cage Material:Brass;
Komatsu CHARGER 6738-81-8080 TURBOCHARGER KI	Type:Angular Contact Ball; Holder Symbol:TYN; Precision:Grade 4; Bearing Style:Double Shielded; Outer Ring Shape:Flat; Inner/Outer Ring Material:[Steel] Steel; Symbol of contact angle:A; Symbol of Bearing Ring Shape:No; Spacer, Sleeve symbol:No; O.D.(Ø):110;
Komatsu CHARGER 3RA-90-66111KF CHARGER	Dimension B:11.0 in; Seal Type:High Temperature Pac; Dimension H:2.4 in; Bearing UPC:013992032799; Tensioning Unit Type:Push Type; Shaft Size:5-7/16 in; Maximum Speed:1450 rpm; Note:This product line wa; Dimension P:1.0 in; Cor - Static Load Rating:183669 lbf;
Komatsu CHARGER 6743-81-8050 TURBOCHARGER KI	Series:222K; S:0.782 in; Diameter d :3 1/4 in; SNW/SNP Assembly Weight:2.87 lb; Locknut:AN-18; Bearing Number:22218K; Lockwasher and Lockplates:W-18; Sleeve:S-18 x 3 1/4; Tolerance1:-0.004 in; D1:4.661 in;