Komatsu CHARGER 3BA-91-71213KF CHARGER ASS'Y	Characteristic rolling element frequency, BSF:4.64 Hz; Radial rigidity:297 N/µm; Nlim (grease):18,000 rpm; rs min:1.1 mm; Min operating temperature, Tmin:-30 °C; a:21 mm; Preload value:0.28 kN; Brand:SNR; D2:65.57 mm; Contact angle α:25 °;
Komatsu CHARGER 6745-81-8090 TURBOCHARGER KI	Series:222K; S:0.782 in; Diameter d :3 1/4 in; SNW/SNP Assembly Weight:2.87 lb; Locknut:AN-18; Bearing Number:22218K; Lockwasher and Lockplates:W-18; Sleeve:S-18 x 3 1/4; Tolerance1:-0.004 in; D1:4.661 in;
Komatsu CHARGER 6745-81-8340 TURBOCHARGER KI	N2:49 mm; s1:24.6 mm; A5:30.2 mm; H1:102 mm; C:31.85 kN; T max.:100 °C; H:117 mm; Z:70.2 mm; N:29mm; A1:16 mm;
Komatsu CHARGER 3BN-91-11510KF CHARGER	Bearing Retained:No; RoHS:6; Number of Bearings:Single; Type:Bearings with Housin; Shape:Flange Type; Volume Discount:Available; Bearing I.D. d(mm):40; Flange Shape:Square Type;
Komatsu CHARGER 6205-81-8150 TURBOCHARGER	K - Factor3:1.49; Series:L521900; G1 - Heat Generation Factor (Roller-Raceway)7:152; Design Units:Imperial; Y2 - ISO Factor6:2.56; Y1 - ISO Factor5:1.72; Y - ISO Factor1:1.53; C - Double Cup Width:2.125 in; G2 - Heat Generation Factor (Rib-Roller End):108; D:5.7500 in;
Komatsu CHARGER 6732-81-8052 TURBOCHARGER KI	Dimension B:11.0 in; Seal Type:High Temperature Pac; Dimension H:2.4 in; Bearing UPC:013992032799; Tensioning Unit Type:Push Type; Shaft Size:5-7/16 in; Maximum Speed:1450 rpm; Note:This product line wa; Dimension P:1.0 in; Cor - Static Load Rating:183669 lbf;
Komatsu CHARGER 3BA-91-71811KF CHARGER ASS'Y	A1:13 mm; J:70 mm; L:95 mm; e:16 mm; d:25 mm; A:27 mm; Designation of housing:F205N-; N:12mm; Z:23.8 mm; s1:30.9 mm;
Komatsu CHARGER TC1G38117010KF TURBOCHARGER	N2:49 mm; s1:24.6 mm; A5:30.2 mm; H1:102 mm; C:31.85 kN; T max.:100 °C; H:117 mm; Z:70.2 mm; N:29mm; A1:16 mm;