Komatsu DOOR 209-54-53251 DOOR	Characteristic outer ring frequency, BPF0:6.14 Hz; Da max:22 mm; Nlim (grease):17,000 rpm; Mass:0.007 kg; f0:15.8; ra max:0.3 mm; Static load, C0:1.26 kN; Fatigue limit load, Cu:0.06 kN; da max:17.5 mm; Characteristic cage frequency, FTF:0.44 Hz;
Komatsu DOOR 426-Z84-2791 DOOR	A1:32 mm; L1:42 mm; Designation of housing:PA209N-; Z:70.2 mm; Recommended tightening torque for set screw:8 Nm; J:90 mm; G:M6x1; s1:20.6 mm; H2:108 mm; E:25 mm;
Komatsu DOOR 426-54-61990 DOOR	A:38 mm; H2:65 mm; Z:45 mm; s1:16.5 mm; H:33.3 mm; Designation of housing:P204N-; G:M6x1; L:127 mm; T min.:-20 °C; A1:22 mm;
Komatsu DOOR 428-54-21350 DOOR	Characteristic outer ring frequency, BPF0:6.14 Hz; Da max:22 mm; Nlim (grease):17,000 rpm; Mass:0.007 kg; f0:15.8; ra max:0.3 mm; Static load, C0:1.26 kN; Fatigue limit load, Cu:0.06 kN; da max:17.5 mm; Characteristic cage frequency, FTF:0.44 Hz;
Komatsu DOOR 419-54-45110 DOOR	Bearing Retained:Yes (with retaining; Number of Bearings:Double; Width T(mm):35 ～ 70; RoHS:6; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Flange O.D. H(φ):60; Holder Surface Treatment:Clear Anodize; Bearing Material:Stainless Steel; Type:Bearings with Housin;
Komatsu DOOR 198-Z11-6573 DOOR	Mass:0.07 kg; Precision class:P0; F:40 mm; Brand:NTN; da min:37 mm; rs min:0.3 mm; Lubrication hole on inner ring:Non/No; d:35 mm; B:30 mm; ras max:0.3 mm;
Komatsu DOOR 41K-54-11962 DOOR	Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:9.14 Hz; Brand:SNR; Fatigue limit load, Cu:62.3 kN; Mass:7.67 kg; Y1:2.43; D:200 mm; b:10 mm; Dynamic load, C:663 kN; Characteristic cage frequency, FTF:0.44 Hz;
Komatsu DOOR 21T-54-33921 DOOR	T min.:-40 °C; C:52.5 kN; Designation of housing:FC212N-; A1:15 mm; A:48 mm; Weight:4.7 kg; N:19mm; C0:32.8 kN; G:M6x1; S:14.9 mm;