| Komatsu DOOR 425-54-11393 DOOR | Fatigue limit load, Cu:0.21 kN; Brand:NTN; Max operating temperature, Tmax:120 °C; f0:12.8; Nlim (grease):18,000 rpm; Mass:0.07 kg; Characteristic inner ring frequency, BPFI:4.37 Hz; ra max:0.6 mm; Characteristic outer ring frequency, BPF0:2.63 Hz; Dynamic load, C:9.6 kN; |
| Komatsu DOOR 426-54-11242 DOOR | Characteristic outer ring frequency, BPF0:6.14 Hz; Da max:22 mm; Nlim (grease):17,000 rpm; Mass:0.007 kg; f0:15.8; ra max:0.3 mm; Static load, C0:1.26 kN; Fatigue limit load, Cu:0.06 kN; da max:17.5 mm; Characteristic cage frequency, FTF:0.44 Hz; |
| Komatsu DOOR 41L-54-21150 DOOR | Min operating temperature, Tmin:-40 °C; Characteristic outer ring frequency, BPF0:9.14 Hz; Brand:SNR; Fatigue limit load, Cu:62.3 kN; Mass:7.67 kg; Y1:2.43; D:200 mm; b:10 mm; Dynamic load, C:663 kN; Characteristic cage frequency, FTF:0.44 Hz; |
| Komatsu DOOR 416-54-56161 DOOR | Bearing Retained:Yes (with retaining; Number of Bearings:Double; Width T(mm):35 ～ 70; RoHS:6; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Flange O.D. H(φ):60; Holder Surface Treatment:Clear Anodize; Bearing Material:Stainless Steel; Type:Bearings with Housin; |
| Komatsu DOOR 569-54-8A560 DOOR | Bearing Retained:Yes (with retaining; Number of Bearings:Double; Width T(mm):35 ～ 70; RoHS:6; Bearing Used:Deep Groove Ball Bea; Shape:Flange Type; Flange O.D. H(φ):60; Holder Surface Treatment:Clear Anodize; Bearing Material:Stainless Steel; Type:Bearings with Housin; |
| Komatsu DOOR 423-925-4992 DOOR | C1:25 mm; D:300 mm; C0:272 kN; B:98 mm; T min.:-20 °C; Weight:34.45 kg; d:125 mm; B2:24 mm; B1:131 mm; C:72 mm; |
| Komatsu DOOR 235-950-3623 DOOR | Characteristic outer ring frequency, BPF0:6.14 Hz; Da max:22 mm; Nlim (grease):17,000 rpm; Mass:0.007 kg; f0:15.8; ra max:0.3 mm; Static load, C0:1.26 kN; Fatigue limit load, Cu:0.06 kN; da max:17.5 mm; Characteristic cage frequency, FTF:0.44 Hz; |
| Komatsu DOOR 120-Y79-4991 DOOR | A1:32 mm; L1:42 mm; Designation of housing:PA209N-; Z:70.2 mm; Recommended tightening torque for set screw:8 Nm; J:90 mm; G:M6x1; s1:20.6 mm; H2:108 mm; E:25 mm; |