Komatsu MASK 154-54-78531 MASK	SW:4 mm; S:18.2 mm; B:36.4 mm; T min.:-40 °C; m:6 mm; B2:15.9 mm; Weight:0.41 kg; T max.:100 °C; d:30 mm; C0:11.2 kN;
Komatsu MASK 154-54-47430 MASK	Dynamic load, C:14 kN; Mass:0.13 kg; Max operating temperature, Tmax:110 °C; Brand:NTN; Fatigue limit load, Cu:0.36 kN; Characteristic rolling element frequency, BSF:4.71 Hz; da max:32 mm; da min:30 mm; f0:13.9; rs min:1 mm;
Komatsu MASK 416-N10-4291 MASK	Mass:0.08 kg; Axial rigidity:0 N/µm; Nlim (oil):44,000 rpm; D6:34.3 mm; Da max:42.5 mm; da min:29.5 mm; Min operating temperature, Tmin:-30 °C; d:25 mm; Nlim (grease):29,000 rpm; a:14 mm;
Komatsu MASK 17A-54-68210 MASK	Dynamic load, C:14 kN; Mass:0.13 kg; Max operating temperature, Tmax:110 °C; Brand:NTN; Fatigue limit load, Cu:0.36 kN; Characteristic rolling element frequency, BSF:4.71 Hz; da max:32 mm; da min:30 mm; f0:13.9; rs min:1 mm;
Komatsu MASK 195-54-75220 MASK	A:48 mm; Weight:1.56 kg; T max.:100 °C; H1:20 mm; B:42.9 mm; C:25.7 kN; Designation of open end cover:SCOU207-23; Recommended tightening torque for set screw:8 Nm; Dz:80 mm; E:22 mm;
Komatsu MASK 23C-54-66340 MASK	A1:12 mm; N2:32 mm; SW:3 mm; A:32 mm; H1:76 mm; C0:7.88 kN; L2:10 mm; B:27 mm; H2:51 mm; L:97 mm;
Komatsu MASK 17A-54-68210 MASK	Type:Bearings with Housin; Flange Shape:Square Type; Volume Discount:Available; Holder Surface Treatment:Black Oxide Coating; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Bearing I.D. d(mm):30;
Komatsu MASK 11Y-03-41311 MASK	W1:3.58 mm; H3:3.2 mm; D:14.60 mm; Lockwasher:W 13; R:65.74 mm; M5:3.96 mm; C1:85.85 mm; B:90.88 mm; Threads No. per Inch:18; Bearing Bore:65 mm;