Komatsu NET 423-54-63521 NET	Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm;
Komatsu NET 154-03-82181 NET	Flange Shape:Round Type; Flange O.D. H(φ):77; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):30; Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Type:Bearings with Housin; Seals:ZZ (Double Shield); Width T(mm):35 ～ 70;
Komatsu NET 21M-03-21541 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET KD0-47100-4854 MAGNETIC SWITCH	Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in;
Komatsu NET 56B-92-12120 NET	Bearing - Housing - Seal:MSE408BRHHTPS; Dimension S:3.0 in; Dimension N:16.5 in; Bearing Type:Split Cylindrical Re; Shaft Size:4.5 in; Bearing Number:MSE408BR; Series Type:Medium Series; Dimension D:15.0 in; Dimension P:1.0 in; Bearing UPC:013992032638;
Komatsu NET 22B-54-43270 NET	Type:Angular Contact Ball; Seal, Shield Symbols:No; O.D.(Ø):150; Type symbol:No; Special Configurations Code:No; Basic Load Rating, Static Rating(N):86000; Precision Grade Symbol:No; Width(mm):35; Outer Ring Shape:Flat; Retainer Type:Resin Forming;
Komatsu NET 22U-54-31410 NET	Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in;
Komatsu NET 208-54-78840 NET	Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm;