Komatsu NET 207-979-8210 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET 2A7-03-12241 NET	Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ～ 70; Bearing Part Number:6201; Number of Bearings:Double; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):56; Type:Bearings with Housin;
Komatsu NET 41L-54-21860 NET	Dynamic load, C:63 kN; Category:Single Row Ball Bear; Minimum Buy Quantity:N/A; Enclosure:Open; Rolling Element:Ball Bearing; Fatigue limit load, Cu:2.36 kN; Characteristic rolling element frequency, BSF:9.85 Hz; B:19 mm; Internal Special Features:No;
Komatsu NET 22U-03-31421 NET	C1 Dynamic Load Rating:1000; A2:241 mm; Bolt Qty:2; N1:42.00 mm; H1:160 mm; Seal:LO530; Bearing:22230K; Locknut:KM30; H2:60.00 mm; Seal Type:Labyrinth;
Komatsu NET 207-54-78520 NET	Width T(mm):25; RoHS:6; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):47; Volume Discount:Available; Bearing Retained:No; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Part Number:608;
Komatsu NET 22L-03-21620 WIRE NET	Y1:2.39; Y2:3.56; Characteristic cage frequency, FTF:0.44 Hz; Associated sleeve reference:H3134; Da max:268 mm; Nlim:2,300 rpm; Radial clearance class:C4; d2:196.2 mm; B:88 mm; Max operating temperature, Tmax:200 °C;
Komatsu NET 2A6-54-13871 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET KD7-47100-0310 MAGNETIC SWITCH	Limiting Speed (Grease):28300 rpm; r - Outer Ring To Clear Radius3:1.0 mm; D:62 mm; Bearing Weight:0.221 Kg; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; do - Ball Diameter:11.906250 mm; Ce - Dynamic Radial Rating1:29500 N; Design Units:METRIC; da - Inner Ring Backing Diameter:31.900 mm;