| Komatsu NET 208-54-84580 NET | Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in; |
| Komatsu NET 22U-54-87323 NET | C1 Dynamic Load Rating:1000; A2:241 mm; Bolt Qty:2; N1:42.00 mm; H1:160 mm; Seal:LO530; Bearing:22230K; Locknut:KM30; H2:60.00 mm; Seal Type:Labyrinth; |
| Komatsu NET 206-03-35191 NET | Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil; |
| Komatsu NET 22K-03-31210 NET | Dynamic load, C:63 kN; Category:Single Row Ball Bear; Minimum Buy Quantity:N/A; Enclosure:Open; Rolling Element:Ball Bearing; Fatigue limit load, Cu:2.36 kN; Characteristic rolling element frequency, BSF:9.85 Hz; B:19 mm; Internal Special Features:No; |
| Komatsu NET 208-54-78880 NET | Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil; |
| Komatsu NET 56B-92-22120 NET | Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil; |
| Komatsu NET 416-54-31430 NET | Width T(mm):25; RoHS:6; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):47; Volume Discount:Available; Bearing Retained:No; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Part Number:608; |
| Komatsu NET 41L-54-21771 NET | Bearing I.D. d(mm):35; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:No; Shape:Flange Type; RoHS:6; |