Komatsu NET 21K-03-51310 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET 21U-03-31142 WIRE NET	Limiting Speed (Grease):28300 rpm; r - Outer Ring To Clear Radius3:1.0 mm; D:62 mm; Bearing Weight:0.221 Kg; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; do - Ball Diameter:11.906250 mm; Ce - Dynamic Radial Rating1:29500 N; Design Units:METRIC; da - Inner Ring Backing Diameter:31.900 mm;
Komatsu NET 208-54-78840 NET	Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm;
Komatsu NET 22P-03-11671 NET	Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ～ 70; Bearing Part Number:6201; Number of Bearings:Double; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):56; Type:Bearings with Housin;
Komatsu NET 56B-03-31361 NET	Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil;
Komatsu NET 569-03-88560 NET	Limiting Speed (Grease):28300 rpm; r - Outer Ring To Clear Radius3:1.0 mm; D:62 mm; Bearing Weight:0.221 Kg; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; do - Ball Diameter:11.906250 mm; Ce - Dynamic Radial Rating1:29500 N; Design Units:METRIC; da - Inner Ring Backing Diameter:31.900 mm;
Komatsu NET 416-54-52321 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET 423-54-38130 NET	Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Diameter series symbol:Medium Load; Machining:No; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):35100; RoHS:6; Fit:J7;