Komatsu NET 206-03-22260 NET	Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ～ 70; Bearing Part Number:6201; Number of Bearings:Double; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):56; Type:Bearings with Housin;
Komatsu NET 208-27-00141 FLOATING SEAL A	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET 22G-03-11311 NET	Limiting Speed (Grease):28300 rpm; r - Outer Ring To Clear Radius3:1.0 mm; D:62 mm; Bearing Weight:0.221 Kg; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; do - Ball Diameter:11.906250 mm; Ce - Dynamic Radial Rating1:29500 N; Design Units:METRIC; da - Inner Ring Backing Diameter:31.900 mm;
Komatsu NET 22P-03-21530 NET	Width T(mm):25; RoHS:6; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):47; Volume Discount:Available; Bearing Retained:No; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Part Number:608;
Komatsu NET 154-03-31280 NET	Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm;
Komatsu NET 208-54-44590 NET	Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in;
Komatsu NET KD7-47100-0130 MAGNETIC SWITCH	Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil;
Komatsu NET 208-54-86450 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;