Komatsu NET 415-54-22990 NET	Dynamic load, C:63 kN; Category:Single Row Ball Bear; Minimum Buy Quantity:N/A; Enclosure:Open; Rolling Element:Ball Bearing; Fatigue limit load, Cu:2.36 kN; Characteristic rolling element frequency, BSF:9.85 Hz; B:19 mm; Internal Special Features:No;
Komatsu NET 22B-03-11160 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET KD7-47100-0350 MAGNETIC SWITCH	Dynamic load, C:63 kN; Category:Single Row Ball Bear; Minimum Buy Quantity:N/A; Enclosure:Open; Rolling Element:Ball Bearing; Fatigue limit load, Cu:2.36 kN; Characteristic rolling element frequency, BSF:9.85 Hz; B:19 mm; Internal Special Features:No;
Komatsu NET 14X-54-34960 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET 198-27-00132 FLOATING SEAL A	Bearing I.D. d(mm):35; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:No; Shape:Flange Type; RoHS:6;
Komatsu NET 14X-54-34940 NET	Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ～ 70; Bearing Part Number:6201; Number of Bearings:Double; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):56; Type:Bearings with Housin;
Komatsu NET 562-15-11570KF MAGNET ASS'Y	Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil;
Komatsu NET 423-54-63521 NET	Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm;