Komatsu NET 790-250-1110 MAGNETIC SWITCH	Bearing I.D. d(mm):35; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:No; Shape:Flange Type; RoHS:6;
Komatsu NET 20Y-54-32770 NET	C1 Dynamic Load Rating:1000; A2:241 mm; Bolt Qty:2; N1:42.00 mm; H1:160 mm; Seal:LO530; Bearing:22230K; Locknut:KM30; H2:60.00 mm; Seal Type:Labyrinth;
Komatsu NET 22U-54-21321 NET	Y1:2.39; Y2:3.56; Characteristic cage frequency, FTF:0.44 Hz; Associated sleeve reference:H3134; Da max:268 mm; Nlim:2,300 rpm; Radial clearance class:C4; d2:196.2 mm; B:88 mm; Max operating temperature, Tmax:200 °C;
Komatsu NET 209-03-51541 NET	Bearing I.D. d(mm):35; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:No; Shape:Flange Type; RoHS:6;
Komatsu NET 14X-54-34970 NET	Limiting Speed (Grease):28300 rpm; r - Outer Ring To Clear Radius3:1.0 mm; D:62 mm; Bearing Weight:0.221 Kg; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; do - Ball Diameter:11.906250 mm; Ce - Dynamic Radial Rating1:29500 N; Design Units:METRIC; da - Inner Ring Backing Diameter:31.900 mm;
Komatsu NET 22U-03-11591 NET	Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ～ 70; Bearing Part Number:6201; Number of Bearings:Double; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):56; Type:Bearings with Housin;
Komatsu NET 21J-03-11351 NET	Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm;
Komatsu NET 207-54-81690 NET	Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in;