| Komatsu NET 145-03-51322 NET | Type:Angular Contact Ball; Seal, Shield Symbols:No; O.D.(Ø):150; Type symbol:No; Special Configurations Code:No; Basic Load Rating, Static Rating(N):86000; Precision Grade Symbol:No; Width(mm):35; Outer Ring Shape:Flat; Retainer Type:Resin Forming; |
| Komatsu NET 22U-54-35550 NET | Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm; |
| Komatsu NET 561-33-00110 FLOATING SEAL A | Dynamic load, C:63 kN; Category:Single Row Ball Bear; Minimum Buy Quantity:N/A; Enclosure:Open; Rolling Element:Ball Bearing; Fatigue limit load, Cu:2.36 kN; Characteristic rolling element frequency, BSF:9.85 Hz; B:19 mm; Internal Special Features:No; |
| Komatsu NET 208-54-84560 NET | Type:Angular Contact Ball; Seal, Shield Symbols:No; O.D.(Ø):150; Type symbol:No; Special Configurations Code:No; Basic Load Rating, Static Rating(N):86000; Precision Grade Symbol:No; Width(mm):35; Outer Ring Shape:Flat; Retainer Type:Resin Forming; |
| Komatsu NET 207-979-8170 NET | Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Diameter series symbol:Medium Load; Machining:No; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):35100; RoHS:6; Fit:J7; |
| Komatsu NET 207-54-78560 NET | Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm; |
| Komatsu NET 195-27-00102 FLOATING SEAL A | C1 Dynamic Load Rating:1000; A2:241 mm; Bolt Qty:2; N1:42.00 mm; H1:160 mm; Seal:LO530; Bearing:22230K; Locknut:KM30; H2:60.00 mm; Seal Type:Labyrinth; |
| Komatsu NET 208-54-74360 NET | Type:Angular Contact Ball; Seal, Shield Symbols:No; O.D.(Ø):150; Type symbol:No; Special Configurations Code:No; Basic Load Rating, Static Rating(N):86000; Precision Grade Symbol:No; Width(mm):35; Outer Ring Shape:Flat; Retainer Type:Resin Forming; |