Komatsu NET 205-03-37932 NET	Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil;
Komatsu NET 154-862-7471 NET	Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in;
Komatsu NET 21J-03-11351 NET	Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm;
Komatsu NET 22U-03-11590 NET	Limiting Speed (Grease):28300 rpm; r - Outer Ring To Clear Radius3:1.0 mm; D:62 mm; Bearing Weight:0.221 Kg; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; do - Ball Diameter:11.906250 mm; Ce - Dynamic Radial Rating1:29500 N; Design Units:METRIC; da - Inner Ring Backing Diameter:31.900 mm;
Komatsu NET 423-33-00020KI FLOATING SEAL A	Bearing I.D. d(mm):35; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:No; Shape:Flange Type; RoHS:6;
Komatsu NET 207-54-43981 NET	C1 Dynamic Load Rating:1000; A2:241 mm; Bolt Qty:2; N1:42.00 mm; H1:160 mm; Seal:LO530; Bearing:22230K; Locknut:KM30; H2:60.00 mm; Seal Type:Labyrinth;
Komatsu NET 21K-03-72370 NET	Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil;
Komatsu NET 417-03-61721 NET	Bearing I.D. d(mm):35; Bearing Used:Deep Groove Ball Bea; Housing Material:1045 Carbon Steel; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Electroless Nickel P; Bearing Retained:No; Shape:Flange Type; RoHS:6;