Komatsu NET 21J-03-11351 NET	C1 Dynamic Load Rating:1000; A2:241 mm; Bolt Qty:2; N1:42.00 mm; H1:160 mm; Seal:LO530; Bearing:22230K; Locknut:KM30; H2:60.00 mm; Seal Type:Labyrinth;
Komatsu NET 21U-03-31142 WIRE NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET 566-03-8L481 NET	Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Diameter series symbol:Medium Load; Machining:No; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):35100; RoHS:6; Fit:J7;
Komatsu NET 22N-54-56550 NET	Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil;
Komatsu NET 195-27-00102KE FLOATING SEAL A	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET 22K-03-21530 NET	Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in;
Komatsu NET 21K-03-72380 NET	Width T(mm):25; RoHS:6; Bearing Used:Deep Groove Ball Bea; Flange O.D. H(φ):47; Volume Discount:Available; Bearing Retained:No; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Part Number:608;
Komatsu NET 22U-54-23980 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;