Komatsu NET 154-27-00020 FLOATING SEAL A | Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in; |
Komatsu NET 14X-Y11-3811 NET | Bearing - Housing - Seal:MSE408BRHHTPS; Dimension S:3.0 in; Dimension N:16.5 in; Bearing Type:Split Cylindrical Re; Shaft Size:4.5 in; Bearing Number:MSE408BR; Series Type:Medium Series; Dimension D:15.0 in; Dimension P:1.0 in; Bearing UPC:013992032638; |
Komatsu NET 21M-54-33840 NET | Dynamic load, C:63 kN; Category:Single Row Ball Bear; Minimum Buy Quantity:N/A; Enclosure:Open; Rolling Element:Ball Bearing; Fatigue limit load, Cu:2.36 kN; Characteristic rolling element frequency, BSF:9.85 Hz; B:19 mm; Internal Special Features:No; |
Komatsu NET 416-54-31420 NET | Number of Rows of Rollers:Single Row; Characteristic outer ring frequency, BPF0:7.19 Hz; Manufacturer Name:NTN; static load capacity:455000 N; bore diameter:130 mm; number of rows:1; Noun:Bearing; Static load, C0:455 kN; Nlim (oil):3,100 rpm; Bore:5.118 Inch | 130 Mil; |
Komatsu NET 21K-54-72541 NET | Flange Shape:Round Type; Flange O.D. H(φ):77; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):30; Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Type:Bearings with Housin; Seals:ZZ (Double Shield); Width T(mm):35 ~ 70; |
Komatsu NET 195-27-00170 FLOATING SEAL A | Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm; |
Komatsu NET 207-54-81890 NET | Flange Shape:Round Type; Flange O.D. H(φ):77; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):30; Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Type:Bearings with Housin; Seals:ZZ (Double Shield); Width T(mm):35 ~ 70; |
Komatsu NET 22M-03-11171 WIRE NET | Unit Body Material:Cast Iron; Unit, Type:Insert Bearing Unit; Diameter series symbol:Medium Load; Machining:No; Surface Treatment:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Basic Load Rating, Dynamic Rating(N):35100; RoHS:6; Fit:J7; |