Komatsu NET 22U-03-81490 NET	Y1:2.39; Y2:3.56; Characteristic cage frequency, FTF:0.44 Hz; Associated sleeve reference:H3134; Da max:268 mm; Nlim:2,300 rpm; Radial clearance class:C4; d2:196.2 mm; B:88 mm; Max operating temperature, Tmax:200 °C;
Komatsu NET 209-54-45650 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;
Komatsu NET 22B-03-12251 NET	C1 Dynamic Load Rating:1000; A2:241 mm; Bolt Qty:2; N1:42.00 mm; H1:160 mm; Seal:LO530; Bearing:22230K; Locknut:KM30; H2:60.00 mm; Seal Type:Labyrinth;
Komatsu NET 22B-03-31190 NET	Limiting Speed (Grease):28300 rpm; r - Outer Ring To Clear Radius3:1.0 mm; D:62 mm; Bearing Weight:0.221 Kg; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; do - Ball Diameter:11.906250 mm; Ce - Dynamic Radial Rating1:29500 N; Design Units:METRIC; da - Inner Ring Backing Diameter:31.900 mm;
Komatsu NET 206-54-31210 NET	Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ～ 70; Bearing Part Number:6201; Number of Bearings:Double; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):56; Type:Bearings with Housin;
Komatsu NET 154-03-82181 NET	Flange Shape:Round Type; Flange O.D. H(φ):77; Bearing Used:Deep Groove Ball Bea; Bearing I.D. d(mm):30; Bearing Retained:Yes (with retaining; Days to Ship:8 Days; Type:Bearings with Housin; Seals:ZZ (Double Shield); Width T(mm):35 ～ 70;
Komatsu NET CA0134693 PLANETARY CARRI	Y1:2.39; Y2:3.56; Characteristic cage frequency, FTF:0.44 Hz; Associated sleeve reference:H3134; Da max:268 mm; Nlim:2,300 rpm; Radial clearance class:C4; d2:196.2 mm; B:88 mm; Max operating temperature, Tmax:200 °C;
Komatsu NET 2A6-54-13860 NET	Dimension S:3.62 in; Pre Install Clearance Min:0.0020 in; Dimension N:2.930 in; Shaft Tolerance:0.0020 in; Y2 - Geometry Factor:4.48; Bearing Number:22215; Locking Style:Eccentric; Dimension R:0.15 in; Y1 - Geometry Factor:3.01; Oil Lubrication - M/N Seal:1600 rpm;