Komatsu NET ND153400-9040 MAGNETIC SWITCH | Type:Angular Contact Ball; Seal, Shield Symbols:No; O.D.(Ø):150; Type symbol:No; Special Configurations Code:No; Basic Load Rating, Static Rating(N):86000; Precision Grade Symbol:No; Width(mm):35; Outer Ring Shape:Flat; Retainer Type:Resin Forming; |
Komatsu NET 22U-54-35560 NET | Recommended tightening torque for set screw:11.5 Nm; C0:20.8 kN; L3:83 mm; L2:16 mm; d:45 mm; G:M6x1; C:31.85 kN; Z:24.4 mm; B:41.2 mm; H1:102 mm; |
Komatsu NET 195-27-00102 FLOATING SEAL A | C1 Dynamic Load Rating:1000; A2:241 mm; Bolt Qty:2; N1:42.00 mm; H1:160 mm; Seal:LO530; Bearing:22230K; Locknut:KM30; H2:60.00 mm; Seal Type:Labyrinth; |
Komatsu NET KD7-47100-0350 MAGNETIC SWITCH | Dynamic load, C:63 kN; Category:Single Row Ball Bear; Minimum Buy Quantity:N/A; Enclosure:Open; Rolling Element:Ball Bearing; Fatigue limit load, Cu:2.36 kN; Characteristic rolling element frequency, BSF:9.85 Hz; B:19 mm; Internal Special Features:No; |
Komatsu NET 569-03-88560 NET | Limiting Speed (Grease):28300 rpm; r - Outer Ring To Clear Radius3:1.0 mm; D:62 mm; Bearing Weight:0.221 Kg; Contact Angle:25 º; Cage Type:CR - Phenolic Outer; do - Ball Diameter:11.906250 mm; Ce - Dynamic Radial Rating1:29500 N; Design Units:METRIC; da - Inner Ring Backing Diameter:31.900 mm; |
Komatsu NET 415-U47-2450 NET | Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ~ 70; Bearing Part Number:6201; Number of Bearings:Double; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):56; Type:Bearings with Housin; |
Komatsu NET 21W-54-47161 NET | Bearing Used:Deep Groove Ball Bea; Width T(mm):30 ~ 70; Bearing Part Number:6201; Number of Bearings:Double; Flange Shape:Square Type; Housing Material:1045 Carbon Steel; Flange O.D. H(φ):56; Type:Bearings with Housin; |
Komatsu NET 207-54-81690 NET | Dimension L Exp:3.95 in; Eng Internal Radial Clearance - Max:0.0047; Oil Lubrication - B/C/O Seal:900 rpm; Grease Lubrication - M/N Seal:1200 rpm; Shaft Size Type:Imperial; Pre Install Clearance Min:0.075 mm; C0 - Static Load:113000 lb; Oil Lubrication - M/N Seal:1200 rpm; Engineering Group:Mounted Bearing; Float:0.083 in; |