Komatsu COLLAR 8242-70-5651 COLLAR | d:19.05 mm; A1:20 mm; H1:14 mm; Designation of housing:PG204N-; L1:21 mm; T max.:100 °C; A:38 mm; E:16 mm; J:49 mm; N:M8; |
Komatsu COLLAR 20K-14-11171 COLLAR | ra max:1 mm; Radial clearance class:CN; D:80 mm; Max operating temperature, Tmax:120 °C; dc min:56 mm; Characteristic outer ring frequency, BPF0:5.73 Hz; Characteristic rolling element frequency, BSF:5.32 Hz; Nlim (oil):12,000 rpm; Min operating temperature, Tmin:-20 °C; Brand:NTN; |
Komatsu COLLAR 796-426-1730 COLLAR | Cg - Geometry Factor11:0.0859; Cup Part Number:384DC; Design Units:Imperial; Da - Cup Frontface Backing Diameter:3.68 in; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)5:10900 lbf; db - Cone Backface Backing Diameter:2.44 in; T - Bearing Width across Cones:2.0624 in; B - Cone Width:0.8640 in; r - Cup Frontface To Clear Radius2:0.03 in; Bearing Weight:3.52 lb; |
Komatsu COLLAR 195-21-12140 COLLAR | Shipping Weight:869 lb; Housing Width:9.1 in; Ca - Axial Load Rating:15602 lbf; Pillow/Plummer Block Style:Split Cylindrical Ho; Shaft Size:155 mm; Support Type:Four-Bolt Plummer Bl; Seal Type:High Temperature Pac; Bearing - Housing - Seal:HSM155BRHHTPS; Bearing Type:Split Cylindrical Re; Maximum Speed:1220 rpm; |
Komatsu COLLAR 23C-70-55180 COLLAR | Characteristic rolling element frequency, BSF:6.25 Hz; B1:28 mm; d1:6 mm; Characteristic outer ring frequency, BPF0:8.44 Hz; Nlim (grease):10,000 rpm; Mass:0.02 kg; Dw:1.48 mm; Bearing with/without cage:Sans; B2:16 mm; Min operating temperature, Tmin:-20 °C; |
Komatsu COLLAR 796-426-1730 COLLAR | d:19.05 mm; A1:20 mm; H1:14 mm; Designation of housing:PG204N-; L1:21 mm; T max.:100 °C; A:38 mm; E:16 mm; J:49 mm; N:M8; |
Komatsu COLLAR 203-26-61340KO COLLAR | Basic Dynamic Load Rating(N):14000; Size Standards:Metric System; Bearing Style:Rubber Sealed; Seal, Shield Symbols:LLB; Outer Ring Shape:Flat; Inner/Outer Ring Material:Steel; Specifications/Environment:Standard; Days to Ship:6 Days; B:15; Load Direction:Radial; |
Komatsu COLLAR 17M-30-54220 COLLAR | Flange O.D. H(φ):44; Number of Bearings:Double; Shape:Flanged Pilot Type; Bearing Used:Deep Groove Ball Bea; Width T(mm):35; Volume Discount:Available; Seals:ZZ (Double Shield); Bearing Retained:Yes (with retaining; Type:Bearings with Housin; |