Komatsu BLOCK 209-919-7990 BLOCK	Recommended tightening torque for set screw:11.5 Nm; Designation of housing:PG207N-; L:100 mm; T max.:200 °C; Z:59.9 mm; S:17.5 mm; H:47.6 mm; A1:27 mm; B:42.9 mm; C0:15.2 kN;
Komatsu BLOCK 195-15-75150 BLOCK	db - Cone Backface Backing Diameter:954.02 mm; Db - Cup Backface Backing Diameter:1029.97 mm; Bearing Weight:120.200 Kg; d:928.000 mm; C0 - Static Radial Rating:8460000 N; r - Cup Backface To Clear Radius2:3.30 mm; Cone Part Number:JL286948H; Design Units:METRIC; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):4055.4;
Komatsu BLOCK 426-62-32332 BLOCK	Brand:NTN; Characteristic inner ring frequency, BPFI:8.44 Hz; Radial clearance class:CN; f0:15.8; rs min:1.1 mm; B:18 mm; Characteristic cage frequency, FTF:0.44 Hz; Mass:0.42 kg; d:65 mm; ra max:1 mm;
Komatsu BLOCK 569-88-86731 BLOCK	Bearing I.D. d(mm):15; Type:Bearings with Housin; Bearing Part Number:6902; Bearing Used:Deep Groove Ball Bea; Bearing Retained:Yes (with retaining; Width T(mm):24; Holder Surface Treatment:Clear Anodize; Housing Material:[Aluminum Alloy] Alu; Lateral Width L(mm):42;
Komatsu BLOCK 26G-60-15180 BLOCK	d:2.2500 in; D:9.13 to 10.38 in; overall length:12.0000 in; base width:4 in; overall height:8.0000 in; expansion type:Non-Expansion Bearing (Fixed); mounting:Two-Bolt Base; finish/coating:Black Oxide; bearing type:Tapered Roller; B:4.56 in; bore type:Round; seal type:Labyrinth; housing construction:Split Pillow Block; radial dynamic load capacity:10716 lb; base to bore centerline:3.7500 in;
Komatsu BLOCK 417-62-31570 BLOCK	F:143 mm; r1s min:3 mm; Nlim (grease):2,600 rpm; da max:140 mm; ra max:2.5 mm; Brand:NTN; Da max:227 mm; Fatigue limit load, Cu:81.5 kN; Mass (without HJ ring):18 kg; Static load, C0:790 kN;
Komatsu BLOCK 22U-62-12840 BLOCK	Recommended tightening torque for set screw:11.5 Nm; Designation of housing:PG207N-; L:100 mm; T max.:200 °C; Z:59.9 mm; S:17.5 mm; H:47.6 mm; A1:27 mm; B:42.9 mm; C0:15.2 kN;
Komatsu BLOCK 427-Z90-2830 BLOCK	Bearing number:635-Z; Size (mm):5x19x6; Bore Diameter (mm):5; Outer Diameter (mm):19; Width (mm):6; d:5 mm; D:19 mm; B:6 mm; C:6 mm; r1 min.:0,3 mm; r2 min.:0,3 mm; Weight:0,009 Kg; Basic dynamic load rating (C):2,2 kN; Basic static load rating (C0):1 kN;