Komatsu BLOCK 6745-81-7060 BLOCK	db - Cone Backface Backing Diameter:954.02 mm; Db - Cup Backface Backing Diameter:1029.97 mm; Bearing Weight:120.200 Kg; d:928.000 mm; C0 - Static Radial Rating:8460000 N; r - Cup Backface To Clear Radius2:3.30 mm; Cone Part Number:JL286948H; Design Units:METRIC; Cage Type:Stamped Steel; G2 - Heat Generation Factor (Rib-Roller End):4055.4;
Komatsu BLOCK 3EC-71-56510KF BLOCK	Number of Bearings:Double; Days to Ship:7 Days; Shape:Flanged Pilot Type; Bearing Retained:Yes (with retaining; Seals:VV (Non-Contact Rubb; Bearing I.D. d(mm):20; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin;
Komatsu BLOCK 6755-21-7420 BLOCK	Brand:NTN; Characteristic inner ring frequency, BPFI:8.44 Hz; Radial clearance class:CN; f0:15.8; rs min:1.1 mm; B:18 mm; Characteristic cage frequency, FTF:0.44 Hz; Mass:0.42 kg; d:65 mm; ra max:1 mm;
Komatsu BLOCK 23B-15-75151 BLOCK	Recommended tightening torque for set screw:11.5 Nm; Designation of housing:PG207N-; L:100 mm; T max.:200 °C; Z:59.9 mm; S:17.5 mm; H:47.6 mm; A1:27 mm; B:42.9 mm; C0:15.2 kN;
Komatsu BLOCK 6219-71-6620 BLOCK	F:143 mm; r1s min:3 mm; Nlim (grease):2,600 rpm; da max:140 mm; ra max:2.5 mm; Brand:NTN; Da max:227 mm; Fatigue limit load, Cu:81.5 kN; Mass (without HJ ring):18 kg; Static load, C0:790 kN;
Komatsu BLOCK 56B-60-11410 BLOCK	mounting:Two-Bolt Base; length through bore:1.5313 in; d:1.3750 in; B:1.7500 in; bore type:Round; maximum operating temperature:225 °F; base to bore centerline:1.8125 in; radial dynamic load capacity:5810 lbf; duty type:Light Duty; D:4.9375 in; housing material:Cast Iron; maximum rpm:4800 RPM; locking device:Eccentric Collar; bolt size:0.5000 in; seal type:Contact/Lip; lubrication type:Lubrication Fitting;
Komatsu BLOCK 208-62-66612 BLOCK	F:143 mm; r1s min:3 mm; Nlim (grease):2,600 rpm; da max:140 mm; ra max:2.5 mm; Brand:NTN; Da max:227 mm; Fatigue limit load, Cu:81.5 kN; Mass (without HJ ring):18 kg; Static load, C0:790 kN;
Komatsu BLOCK 20K-62-31252 BLOCK	Maximum Capacity / Filling Slot:No; B:22 mm; EAN:0692314680827; da min:68 mm; D:110 mm; rs min:1.5 mm; Nlim (grease):6,000 rpm; Category:Single Row Ball Bear; Minimum Buy Quantity:N/A; Max operating temperature, Tmax:170 °C;