Komatsu HOLDER 6204-11-3110KF HOLDER ASS'Y	s1:64.3 mm; Designation of bearing:EX216G2L3; A1:55 mm; T min.:-20 °C; B1:95.2 mm; Designation of housing:PE216-; Recommended tightening torque for set screw:33 Nm; d1:110 mm; H:89 mm; C0:54.2 kN;
Komatsu HOLDER 13Y-54-21942 HOLDER	Cor - Static Load Rating:419718 lbf; Maximum Speed:1030 rpm; Cr - Dynamic Load Rating:298996 lbf; Dimension V:0.3 in; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992070777; Dimension H:6.1 in; Dimension T:28.5 in; Dimension N:21.502 in; Series Type:Heavy Series;
Komatsu HOLDER 23B-70-31523 HOLDER	T min.:-20 °C; A1:27 mm; Recommended tightening torque for set screw:8 Nm; H:47.6 mm; Dz:80 mm; E:20 mm; A:48 mm; T max.:100 °C; d:33.34 mm; H1:13 mm;
Komatsu HOLDER 6212-16-3700 NOZZLE HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER KD7-23750-0064 BRUSH HOLDER AS	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER 209-03-71630 HOLDER	H1:25 mm; Designation of open end cover:SCOU212-39; Weight:4.99 kg; T max.:100 °C; S:25.4 mm; H2:138 mm; J:184 mm; C:52.5 kN; Dz:120 mm; G:M6x1;
Komatsu HOLDER 208-72-54220 HOLDER	H2:70 mm; H:36.5 mm; Designation of bearing:SUC205; d:25 mm; s1:17.05 mm; L:140 mm; Z:46.8 mm; B:34.1 mm; N:13mm; Dz:60 mm;
Komatsu HOLDER 19M-06-31570 HOLDER	G1 - Heat Generation Factor (Roller-Raceway)7:2500; r - Cup Frontface To Clear Radius2:0.130 in; C - Double Cup Width:6.8750 in; Da - Cup Frontface Backing Diameter:23.11 in; Y1 - ISO Factor5:0.72; D:24.5000 in; Cg - Geometry Factor8:0.24; Series:H961600; K - Factor3:0.62; Y - ISO Factor1:0.64;