Komatsu HOLDER 792-840-2050 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 14X-27-51330 HOLDER	H1:25 mm; Designation of open end cover:SCOU212-39; Weight:4.99 kg; T max.:100 °C; S:25.4 mm; H2:138 mm; J:184 mm; C:52.5 kN; Dz:120 mm; G:M6x1;
Komatsu HOLDER 3FD-55-34111KF HOLDER	Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C;
Komatsu HOLDER 17A-30-48413 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 6221-11-3300 NOZZLE HOLDER	T min.:-20 °C; A1:27 mm; Recommended tightening torque for set screw:8 Nm; H:47.6 mm; Dz:80 mm; E:20 mm; A:48 mm; T max.:100 °C; d:33.34 mm; H1:13 mm;
Komatsu HOLDER 234-46-11161 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 46B-ART-1410KF HOLDER	Cor - Static Load Rating:419718 lbf; Maximum Speed:1030 rpm; Cr - Dynamic Load Rating:298996 lbf; Dimension V:0.3 in; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992070777; Dimension H:6.1 in; Dimension T:28.5 in; Dimension N:21.502 in; Series Type:Heavy Series;
Komatsu HOLDER 175-14-14160 HOLDER	T min.:-20 °C; A1:27 mm; Recommended tightening torque for set screw:8 Nm; H:47.6 mm; Dz:80 mm; E:20 mm; A:48 mm; T max.:100 °C; d:33.34 mm; H1:13 mm;