Komatsu HOLDER 8287-70-7370 HOLDER	H1:25 mm; Designation of open end cover:SCOU212-39; Weight:4.99 kg; T max.:100 °C; S:25.4 mm; H2:138 mm; J:184 mm; C:52.5 kN; Dz:120 mm; G:M6x1;
Komatsu HOLDER 45B-ARS-1580NKKF HOLDER	G1 - Heat Generation Factor (Roller-Raceway)7:2500; r - Cup Frontface To Clear Radius2:0.130 in; C - Double Cup Width:6.8750 in; Da - Cup Frontface Backing Diameter:23.11 in; Y1 - ISO Factor5:0.72; D:24.5000 in; Cg - Geometry Factor8:0.24; Series:H961600; K - Factor3:0.62; Y - ISO Factor1:0.64;
Komatsu HOLDER KBB0111-77002 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER FB0-51730-0620KF HOLDER	H2:70 mm; H:36.5 mm; Designation of bearing:SUC205; d:25 mm; s1:17.05 mm; L:140 mm; Z:46.8 mm; B:34.1 mm; N:13mm; Dz:60 mm;
Komatsu HOLDER 6136-12-3200KF HOLDER ASS'Y	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER 13Y-54-21942 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 23A-70-71130 HOLDER	Unit, Type:Insert Bearing Unit; Bearing Inner Dia. Shape:Cylindrical Bore Set; d:12; Accessory:No Cover; Fit:J7; Basic Load Rating, Static Rating(N):6650; Surface Treatment:No; Diameter series symbol:Used for Light load; Machining:Oil-free type; Rolling Element Material:Bearing Steel;
Komatsu HOLDER 426-N42-3841 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;