Komatsu HOLDER 3EB-55-67310KF HOLDER	G1 - Heat Generation Factor (Roller-Raceway)7:2500; r - Cup Frontface To Clear Radius2:0.130 in; C - Double Cup Width:6.8750 in; Da - Cup Frontface Backing Diameter:23.11 in; Y1 - ISO Factor5:0.72; D:24.5000 in; Cg - Geometry Factor8:0.24; Series:H961600; K - Factor3:0.62; Y - ISO Factor1:0.64;
Komatsu HOLDER 569-22-62560 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 14X-54-14510 HOLDER	Ca - Axial Load Rating:11780 lbf; Dimension H:4.9 in; Cr - Dynamic Load Rating:164111 lbf; Maximum Speed:1320 rpm; Series Type:Medium Series; Note:This product line wa; Dimension N:15.500 in; Dimension R:18.3 in; Dimension P:1.0 in; Bearing - Housing - Seal:MSE511BRHRSS;
Komatsu HOLDER 11Y-69-42292 DRAWBAR ASS'Y	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER 58B-22-12361 HOLDER	Number of Bearings:Single; Lateral Width L(mm):160; Bearing I.D. d(mm):40; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Height H(mm):50 ～ 100; C Chamfered:Not Provided; Width T(mm):27; Bearing Part Number:6208; Days to Ship:8 Days;
Komatsu HOLDER 134-06-72650 HOLDER	Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C;
Komatsu HOLDER 6553-11-1122 HOLDER	H1:25 mm; Designation of open end cover:SCOU212-39; Weight:4.99 kg; T max.:100 °C; S:25.4 mm; H2:138 mm; J:184 mm; C:52.5 kN; Dz:120 mm; G:M6x1;
Komatsu HOLDER 562-40-3A360 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;