Komatsu HOLDER 21M-46-14540 HOLDER	Cor - Static Load Rating:419718 lbf; Maximum Speed:1030 rpm; Cr - Dynamic Load Rating:298996 lbf; Dimension V:0.3 in; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992070777; Dimension H:6.1 in; Dimension T:28.5 in; Dimension N:21.502 in; Series Type:Heavy Series;
Komatsu HOLDER 417-06-23410 HOLDER	Ca - Axial Load Rating:11780 lbf; Dimension H:4.9 in; Cr - Dynamic Load Rating:164111 lbf; Maximum Speed:1320 rpm; Series Type:Medium Series; Note:This product line wa; Dimension N:15.500 in; Dimension R:18.3 in; Dimension P:1.0 in; Bearing - Housing - Seal:MSE511BRHRSS;
Komatsu HOLDER 2953-10-1551 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 793-415-1120 HOLDER	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER KD7-23750-0054 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 235-70-11161 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 3EC-55-31610SGKF 9HOLDER	Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C;
Komatsu HOLDER BT415115050 HOLDER	G1 - Heat Generation Factor (Roller-Raceway)7:2500; r - Cup Frontface To Clear Radius2:0.130 in; C - Double Cup Width:6.8750 in; Da - Cup Frontface Backing Diameter:23.11 in; Y1 - ISO Factor5:0.72; D:24.5000 in; Cg - Geometry Factor8:0.24; Series:H961600; K - Factor3:0.62; Y - ISO Factor1:0.64;