Komatsu HOLDER 569-22-62560 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER 11Y-30-44550 HOLDER	Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C;
Komatsu HOLDER 45A-5RS-1420SGKF HOLDER	Ca - Axial Load Rating:11780 lbf; Dimension H:4.9 in; Cr - Dynamic Load Rating:164111 lbf; Maximum Speed:1320 rpm; Series Type:Medium Series; Note:This product line wa; Dimension N:15.500 in; Dimension R:18.3 in; Dimension P:1.0 in; Bearing - Housing - Seal:MSE511BRHRSS;
Komatsu HOLDER 8287-70-7370 HOLDER	H1:25 mm; Designation of open end cover:SCOU212-39; Weight:4.99 kg; T max.:100 °C; S:25.4 mm; H2:138 mm; J:184 mm; C:52.5 kN; Dz:120 mm; G:M6x1;
Komatsu HOLDER 198-03-62120 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 795-225-1600 HOLDER	H2:70 mm; H:36.5 mm; Designation of bearing:SUC205; d:25 mm; s1:17.05 mm; L:140 mm; Z:46.8 mm; B:34.1 mm; N:13mm; Dz:60 mm;
Komatsu HOLDER 11Y-69-22290 DRAWBAR ASS'Y	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 427-22-11240 HOLDER	s1:64.3 mm; Designation of bearing:EX216G2L3; A1:55 mm; T min.:-20 °C; B1:95.2 mm; Designation of housing:PE216-; Recommended tightening torque for set screw:33 Nm; d1:110 mm; H:89 mm; C0:54.2 kN;