Komatsu HOLDER 415-904-1420 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 6136-12-3200KF HOLDER ASS'Y	Ca - Axial Load Rating:11780 lbf; Dimension H:4.9 in; Cr - Dynamic Load Rating:164111 lbf; Maximum Speed:1320 rpm; Series Type:Medium Series; Note:This product line wa; Dimension N:15.500 in; Dimension R:18.3 in; Dimension P:1.0 in; Bearing - Housing - Seal:MSE511BRHRSS;
Komatsu HOLDER 195-43-45762 HOLDER	T min.:-20 °C; A1:27 mm; Recommended tightening torque for set screw:8 Nm; H:47.6 mm; Dz:80 mm; E:20 mm; A:48 mm; T max.:100 °C; d:33.34 mm; H1:13 mm;
Komatsu HOLDER 46B-ARS-1410KF HOLDER	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER 792-840-2050 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 198-03-62120 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 6212-16-3700 NOZZLE HOLDER	Cor - Static Load Rating:419718 lbf; Maximum Speed:1030 rpm; Cr - Dynamic Load Rating:298996 lbf; Dimension V:0.3 in; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992070777; Dimension H:6.1 in; Dimension T:28.5 in; Dimension N:21.502 in; Series Type:Heavy Series;
Komatsu HOLDER 196-72-11260 HOLDER	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;