Komatsu HOLDER BT415163050 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;
Komatsu HOLDER 45C-ART-1420UKKF 9HOLDER	G1 - Heat Generation Factor (Roller-Raceway)7:2500; r - Cup Frontface To Clear Radius2:0.130 in; C - Double Cup Width:6.8750 in; Da - Cup Frontface Backing Diameter:23.11 in; Y1 - ISO Factor5:0.72; D:24.5000 in; Cg - Geometry Factor8:0.24; Series:H961600; K - Factor3:0.62; Y - ISO Factor1:0.64;
Komatsu HOLDER 8295-70-3291 HOLDER	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER 11Y-69-42292 DRAWBAR ASS'Y	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER 6152-12-3600 NOZZLE HOLDER	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER 58B-22-12371 HOLDER	Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C;
Komatsu HOLDER 196-72-11260 HOLDER	d:30.16 mm; s1:15 mm; L:80 mm; T min.:-20 °C; A:31 mm; B:30 mm; Designation of bearing:US206-19G2T20; Recommended tightening torque for set screw:3.7 Nm; C:19.5 kN; Weight:0.85 kg;
Komatsu HOLDER 23F-843-3210 HOLDER	Bearing Material:Steel; Number of Bearings:Double; Holder Width(inch):2-3/4; Bearing Used:Deep Groove Ball Bea; Bearing Part Number:6005; Volume Discount:Available; Shape:Flanged Pilot Type; Bearing Retained:No;