Komatsu HOLDER 793-615-1210 HOLDER	Ca - Axial Load Rating:11780 lbf; Dimension H:4.9 in; Cr - Dynamic Load Rating:164111 lbf; Maximum Speed:1320 rpm; Series Type:Medium Series; Note:This product line wa; Dimension N:15.500 in; Dimension R:18.3 in; Dimension P:1.0 in; Bearing - Housing - Seal:MSE511BRHRSS;
Komatsu HOLDER 3EH-62-11190KF HOLDER	Min operating temperature, Tmin:-20 °C; C0r:29.1 kN; G1:19 mm; C1:0.8 mm; Characteristic rolling element frequency, BSF:6.22 Hz; G:M18X1.5; C:20 mm; d1:18 mm; Maximum tightening torque:76 Nm; Max operating temperature, Tmax:120 °C;
Komatsu HOLDER 235-45-13361 HOLDER	Characteristic cage frequency, FTF:0.44 Hz; Cr:8.3 kN; Db max:26 mm; Nlim (grease):10,000 rpm; Da max:22 mm; k:2.5 mm; Mass:0.02 kg; Lubrication hole on outer ring:Oui/Yes; Max operating temperature, Tmax:120 °C; Fw:20 mm;
Komatsu HOLDER 793-615-1220 HOLDER	Cor - Static Load Rating:419718 lbf; Maximum Speed:1030 rpm; Cr - Dynamic Load Rating:298996 lbf; Dimension V:0.3 in; Support Type:Round Flange; Bearing - Housing - Seal UPC:013992070777; Dimension H:6.1 in; Dimension T:28.5 in; Dimension N:21.502 in; Series Type:Heavy Series;
Komatsu HOLDER 21W-70-48272 HOLDER	Weight:0.71 kg; L:75 mm; S:14.3 mm; C0:7.88 kN; d:25 mm; H2:70 mm; B:34 mm; T min.:-20 °C; s1:17 mm; Designation of housing:PG205-;
Komatsu HOLDER 8211-71-4131 HOLDER	Number of Bearings:Single; Lateral Width L(mm):160; Bearing I.D. d(mm):40; Housing Material:1045 Carbon Steel; Bearing Retained:Yes (with retaining; Height H(mm):50 ～ 100; C Chamfered:Not Provided; Width T(mm):27; Bearing Part Number:6208; Days to Ship:8 Days;
Komatsu HOLDER BT41511505D HOLDER ASS'Y	s1:64.3 mm; Designation of bearing:EX216G2L3; A1:55 mm; T min.:-20 °C; B1:95.2 mm; Designation of housing:PE216-; Recommended tightening torque for set screw:33 Nm; d1:110 mm; H:89 mm; C0:54.2 kN;
Komatsu HOLDER 45C-ART-1420UKKF 9HOLDER	G1 - Heat Generation Factor (Roller-Raceway)7:2500; r - Cup Frontface To Clear Radius2:0.130 in; C - Double Cup Width:6.8750 in; Da - Cup Frontface Backing Diameter:23.11 in; Y1 - ISO Factor5:0.72; D:24.5000 in; Cg - Geometry Factor8:0.24; Series:H961600; K - Factor3:0.62; Y - ISO Factor1:0.64;